eckelmann.kpaste.net RSS
Difference between
modified post 8aaa769e by Anonymous on Mon 7th Sep 2020 10:49
original post f6a by Anonymous on Mon 7th Sep 2020 10:34
Download diff
Show
old version |
new version |
both versions
| 1 | - | barebox:/ loadenv -d | |
| 1 | + | --- a/ptxdist/configs/ecu02/barebox-defaultenv-2/boot/nand | |
| 2 | - | loading environment from defaultenv | |
| 2 | + | +++ b/ptxdist/configs/ecu02/barebox-defaultenv-2/boot/nand | |
| 3 | - | barebox:/ saveenv | |
| 3 | + | @@ -2,7 +2,8 @@ | |
| 6 | 4 | ||
| 5 | + | PARAM_SKIP=$global.eag.skipupdate | |
| 7 | 6 | ||
| 8 | - | barebox 2016.06.0-EAG_2.02-g9917fe052de8 #1 Wed Sep 2 15:12:44 CEST 2020 | |
| 7 | + | -oftree -f | |
| 8 | + | +# disabled for Linux 4.9 kernel | |
| 9 | 10 | ||
| 11 | + | global bootm.image="/mnt/nand0-root/boot/zImage" | |
| 10 | 13 | ||
| 11 | - | Board: Eckelmann AG ECU02 | |
| 14 | + | ||
| 12 | - | mdio_bus: miibus0: probed | |
| 15 | + | ||
| 13 | - | nand: ONFI flash detected | |
| 16 | + | ||
| 14 | - | nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64 | |
| 17 | + | ||
| 15 | - | Bad block table found at page 65472, version 0x01 | |
| 18 | + | ||
| 16 | - | Bad block table found at page 65408, version 0x01 | |
| 19 | + | ||
| 17 | - | m25p80 m25p80@20: mr25h256 (32 Kbytes) | |
| 20 | + | ||
| 18 | - | imx-usb 53ff4400.usb: USB EHCI 1.00 | |
| 21 | + | ||
| 19 | - | netconsole: registered as netconsole-1 | |
| 22 | + | ||
| 20 | - | malloc space: 0x83efde40 -> 0x87dfbc7f (size 63 MiB) | |
| 23 | + | ||
| 21 | - | running /env/bin/init... | |
| 24 | + | ||
| 22 | - | Check if Memory is flashbased ... | |
| 25 | + | ||
| 23 | - | __PASS__ | |
| 26 | + | ||
| 24 | - | ==> Saving Defaultenv ... | |
| 27 | + | ||
| 25 | - | saving environment | |
| 28 | + | ||
| 26 | - | USB: scanning bus for devices... | |
| 29 | + | ||
| 27 | - | Bus 001 Device 001: ID 0000:0000 EHCI Host Controller | |
| 30 | + | ||
| 28 | - | 1 USB Device(s) found | |
| 31 | + | ||
| 29 | - | USB: scanning bus for devices... | |
| 32 | + | ||
| 30 | - | 1 USB Device(s) found | |
| 33 | + | ||
| 31 | - | running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed | |
| 34 | + | ||
| 32 | - | USB: scanning bus for devices... | |
| 35 | + | ||
| 33 | - | 1 USB Device(s) found | |
| 36 | + | ||
| 34 | - | running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed | |
| 37 | + | ||
| 35 | - | USB: scanning bus for devices... | |
| 38 | + | ||
| 36 | - | 1 USB Device(s) found | |
| 39 | + | ||
| 37 | - | running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed | |
| 40 | + | ||
| 38 | 41 | ||
| 39 | - | Hit m for menu or any other key to stop autoboot: 0 | |
| 42 | + | ||
| 40 | - | blspec: blspec_scan_directory: nand loader/entries | |
| 43 | + | ||
| 41 | - | USB: scanning bus for devices... | |
| 44 | + | ||
| 42 | - | 1 USB Device(s) found | |
| 45 | + | ||
| 43 | - | USB: scanning bus for devices... | |
| 46 | + | ||
| 44 | - | 1 USB Device(s) found | |
| 47 | + | ||
| 45 | - | running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed | |
| 48 | + | ||
| 46 | - | USB: scanning bus for devices... | |
| 49 | + | ||
| 47 | - | 1 USB Device(s) found | |
| 50 | + | ||
| 48 | - | running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed | |
| 51 | + | ||
| 49 | - | Could not find Imagefile: /mnt/usbstorage/ecu02/root.ubi | |
| 52 | + | ||
| 50 | - | UBI: scanning is finished | |
| 53 | + | ||
| 51 | - | UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 16, need 20 | |
| 54 | + | ||
| 52 | - | UBI: registering /dev/nand0.root.ubi | |
| 55 | + | ||
| 53 | - | UBI: registering root as /dev/nand0.root.ubi.root | |
| 56 | + | ||
| 54 | - | UBI: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0 | |
| 57 | + | ||
| 55 | - | UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode | |
| 58 | + | ||
| 56 | - | UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
| 59 | + | ||
| 57 | - | UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) | |
| 60 | + | ||
| 58 | - | UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) | |
| 61 | + | ||
| 59 | - | UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 83effabc, small LPT model | |
| 62 | + | ||
| 60 | 63 | ||
| 61 | - | Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage' | |
| 64 | + | ||
| 62 | - | commandline: console=ttymxc0,115200n8 lpj=995328 mtdparts=mxc_nand:1024k(barebox),1024k(bareboxenv),2432k(history),80M(root),-(var) console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3 | |
| 65 | + | ||
| 63 | - | arch_number: 8016 | |
| 66 | + | ||
| 64 | - | Uncompressing Linux... done, booting the kernel. | |
| 67 | + | ||
| 65 | 68 | ||
| 66 | - | Error: unrecognized/unsupported machine ID (r1 = 0x00001f50). | |
| 69 | + | ||
| 67 | 70 | ||
| 68 | - | Available machine support: | |
| 71 | + | ||
| 69 | 72 | ||
| 70 | - | ID (hex) NAME | |
| 73 | + | ||
| 71 | - | ffffffff Generic DT based system | |
| 74 | + | ||
| 72 | - | ffffffff Freescale i.MX25 (Device Tree Support) | |
| 75 | + | ||
| 73 | 76 | ||
| 74 | - | Please check your kernel config and/or bootloader. | |
| 77 | + | ||
| 75 | 78 |
Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.