ukl/development ecu02 boot hangs 2020-09-02, CONFIG_LL enabled
Posted by Anonymous on Mon 7th Sep 2020 10:34
raw | new post
view followups (newest first): Fix ukl/development ecu02 boot hangs 2020-09-02, CONFIG_LL enabled by Anonymous

barebox:/ loadenv -d
loading environment from defaultenv
barebox:/ saveenv
saving environment
barebox:/ reset


barebox 2016.06.0-EAG_2.02-g9917fe052de8 #1 Wed Sep 2 15:12:44 CEST 2020


Board: Eckelmann AG ECU02
mdio_bus: miibus0: probed
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
m25p80 m25p80@20: mr25h256 (32 Kbytes)
imx-usb 53ff4400.usb: USB EHCI 1.00
netconsole: registered as netconsole-1
malloc space: 0x83efde40 -> 0x87dfbc7f (size 63 MiB)
running /env/bin/init...
Check if Memory is flashbased ...
__PASS__
==> Saving Defaultenv ...
saving environment
USB: scanning bus for devices...
Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
1 USB Device(s) found
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed

Hit m for menu or any other key to stop autoboot:  0
blspec: blspec_scan_directory: nand loader/entries
USB: scanning bus for devices...
1 USB Device(s) found
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
Could not find Imagefile: /mnt/usbstorage/ecu02/root.ubi
UBI: scanning is finished
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 16, need 20
UBI: registering /dev/nand0.root.ubi
UBI: registering root as /dev/nand0.root.ubi.root
UBI: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 83effabc, small LPT model

Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage'
commandline:  console=ttymxc0,115200n8   lpj=995328 mtdparts=mxc_nand:1024k(barebox),1024k(bareboxenv),2432k(history),80M(root),-(var) console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3
arch_number: 8016
Uncompressing Linux... done, booting the kernel.

Error: unrecognized/unsupported machine ID (r1 = 0x00001f50).

Available machine support:

ID (hex)        NAME
ffffffff        Generic DT based system
ffffffff        Freescale i.MX25 (Device Tree Support)

Please check your kernel config and/or bootloader.