pastebin - collaborative debugging tool
eckelmann.kpaste.net RSS


QAX V3.1.10 to V2 downgrade console log
Posted by Anonymous on Fri 8th Nov 2019 09:34
raw | new post

  1. barebox 2018.05.0-20190221-1-EAG_3.01-g2fa9066 #1 Tue Nov 5 10:18:32 CET 2019
  2.  
  3.  
  4. Board: Eckelmann AG ECU01
  5. mdio_bus: miibus0: probed
  6. nand: ONFI flash detected
  7. nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
  8. Bad block table found at page 65472, version 0x01
  9. Bad block table found at page 65408, version 0x01
  10. imx-usb 53ff4400.usb: USB EHCI 1.00
  11. imxfb imxfb: i.MX Framebuffer driver
  12. malloc space: 0x83e7de00 -> 0x87cfbbff (size 62.5 MiB)
  13. running /env/bin/init...
  14. Check if Memory is flashbased ...
  15. __PASS__
  16.  
  17. Hit CTRL-C to stop autoboot:    1
  18. __DEVELOPER_MODE__ENABLED__
  19. nv variable modified, will save nv variables on shutdown
  20. usb: USB: scanning bus for devices...
  21. usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
  22. usb: Bus 001 Device 002: ID 058f:6387 Mass Storage
  23. Using index 0 for the new disk
  24. usb: 2 USB Device(s) found
  25. usb: USB: scanning bus for devices...
  26. usb: 2 USB Device(s) found
  27. booting 'nand'
  28. ubi0: scanning is finished
  29. ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 6, need 20
  30. ubi0: registering /dev/nand0.root.ubi
  31. ubi0: registering root as /dev/nand0.root.ubi.root
  32. ubi0: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
  33. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  34. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  35. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  36. ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
  37. ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  38. ubi0: max/mean erase counter: 21/14, WL threshold: 4096, image sequence number: 2792
  39. ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 6
  40. UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
  41. UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  42. UBIFS (ubi0:0): FS size: 78344192 bytes (74 MiB, 617 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  43. UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  44. UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84485b94, small LPT model
  45. usb: USB: scanning bus for devices...
  46. usb: 2 USB Device(s) found
  47. usb_update_rootfs: Could not find Imagefile: /mnt/usbstorage/quantron-a/root.ubi
  48. usb: USB: scanning bus for devices...
  49. usb: 2 USB Device(s) found
  50. Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
  51. Found all Imagefiles
  52. Found Prebox: /mnt/nand0-root/boot/prebox-qaV2.img
  53. update succeeded
  54. ------------->Prebox Update SUCCESS<---------------
  55. nv variables modified, saving them
  56. envfs: no envfs (magic mismatch) - envfs never written?
  57. environment load /dev/env0: error 2
  58. Maybe you have to create the partition.
  59. No renderer found for filetype UBI image
  60. splash: error 2
  61. Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
  62. BBT is flashbased, skip creating one
  63. ------------->Try Starting Upgrade ...<---------------
  64. Could not find Imagefile: /mnt/usbstorage/quantron-a/barebox-image
  65. ------------->Try starting Downgrade ...<---------------
  66. Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
  67. Found all Imagefiles
  68.         [#################################################################]
  69. kernel_update: OK
  70. ubiformat: nand0.rootfs (nand), size 50331648 bytes (48 MiB), 384 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
  71. libscan: scanning eraseblock 383 -- 100 % complete  
  72. ubiformat: 384 eraseblocks have valid erase counter, mean value is 14
  73. ubiformat: flashing eraseblock 218 -- 57 % complete  
  74. ubiformat: formatting eraseblock 383 -- 100 % complete  
  75. root_update: OK
  76. ubiformat: nand0.homefs (nand), size 16777216 bytes (16 MiB), 128 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
  77. libscan: scanning eraseblock 127 -- 100 % complete  
  78. ubiformat: 128 eraseblocks have valid erase counter, mean value is 14
  79. ubiformat: flashing eraseblock 37 -- 29 % complete  
  80. ubiformat: formatting eraseblock 127 -- 100 % complete  
  81. home_update: OK
  82. ubiformat: nand0.rwfs (nand), size 25165824 bytes (24 MiB), 192 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
  83. libscan: scanning eraseblock 191 -- 100 % complete  
  84. ubiformat: 192 eraseblocks have valid erase counter, mean value is 13
  85. ubiformat: flashing eraseblock 36 -- 19 % complete  
  86. ubiformat: formatting eraseblock 191 -- 100 % complete  
  87. rw_update: OK
  88.         [#################################################################]
  89. bootsplash_update: OK
  90.         [#################################################################]
  91. uboot_update: OK
  92. ------------->System Upgrade SUCCESS<---------------
  93. __PASS__

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with {%HIGHLIGHT}




All content is user-submitted.
The administrators of this site (kpaste.net) are not responsible for their content.
Abuse reports should be emailed to us at