barebox 2018.05.0-20190221-1-EAG_3.01-g2fa9066 #1 Tue Nov 5 10:18:32 CET 2019


Board: Eckelmann AG ECU01
mdio_bus: miibus0: probed
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
imx-usb 53ff4400.usb: USB EHCI 1.00
imxfb imxfb: i.MX Framebuffer driver
malloc space: 0x83e7de00 -> 0x87cfbbff (size 62.5 MiB)
running /env/bin/init...
Check if Memory is flashbased ...
__PASS__

Hit CTRL-C to stop autoboot:    1
__DEVELOPER_MODE__ENABLED__
nv variable modified, will save nv variables on shutdown
usb: USB: scanning bus for devices...
usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
usb: Bus 001 Device 002: ID 058f:6387 Mass Storage
Using index 0 for the new disk
usb: 2 USB Device(s) found
usb: USB: scanning bus for devices...
usb: 2 USB Device(s) found
booting 'nand'
ubi0: scanning is finished
ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 6, need 20
ubi0: registering /dev/nand0.root.ubi
ubi0: registering root as /dev/nand0.root.ubi.root
ubi0: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 21/14, WL threshold: 4096, image sequence number: 2792
ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 6
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 78344192 bytes (74 MiB, 617 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84485b94, small LPT model
usb: USB: scanning bus for devices...
usb: 2 USB Device(s) found
usb_update_rootfs: Could not find Imagefile: /mnt/usbstorage/quantron-a/root.ubi
usb: USB: scanning bus for devices...
usb: 2 USB Device(s) found
Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
Found all Imagefiles
Found Prebox: /mnt/nand0-root/boot/prebox-qaV2.img
update succeeded
------------->Prebox Update SUCCESS<---------------
nv variables modified, saving them
envfs: no envfs (magic mismatch) - envfs never written?
environment load /dev/env0: error 2
Maybe you have to create the partition.
No renderer found for filetype UBI image
splash: error 2
Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
BBT is flashbased, skip creating one
------------->Try Starting Upgrade ...<---------------
Could not find Imagefile: /mnt/usbstorage/quantron-a/barebox-image
------------->Try starting Downgrade ...<---------------
Image-Files: uboot=/mnt/usbstorage/quantron-a/004_u-boot.bin, kernel=/mnt/usbstorage/quantron-a/004_uImage, root=/mnt/usbstorage/quantron-a/006_rootfs.ubi, home=/mnt/usbstorage/quantron-a/008_home.ubi
Found all Imagefiles
        [#################################################################]
kernel_update: OK
ubiformat: nand0.rootfs (nand), size 50331648 bytes (48 MiB), 384 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 383 -- 100 % complete  
ubiformat: 384 eraseblocks have valid erase counter, mean value is 14
ubiformat: flashing eraseblock 218 -- 57 % complete  
ubiformat: formatting eraseblock 383 -- 100 % complete  
root_update: OK
ubiformat: nand0.homefs (nand), size 16777216 bytes (16 MiB), 128 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 127 -- 100 % complete  
ubiformat: 128 eraseblocks have valid erase counter, mean value is 14
ubiformat: flashing eraseblock 37 -- 29 % complete  
ubiformat: formatting eraseblock 127 -- 100 % complete  
home_update: OK
ubiformat: nand0.rwfs (nand), size 25165824 bytes (24 MiB), 192 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 191 -- 100 % complete  
ubiformat: 192 eraseblocks have valid erase counter, mean value is 13
ubiformat: flashing eraseblock 36 -- 19 % complete  
ubiformat: formatting eraseblock 191 -- 100 % complete  
rw_update: OK
        [#################################################################]
bootsplash_update: OK
        [#################################################################]
uboot_update: OK
------------->System Upgrade SUCCESS<---------------
__PASS__