schenk ecu02 bootlog
Posted by Anonymous on Wed 23rd Sep 2020 12:57
raw | new post

barebox@Eckelmann AG ECU02:/env/boot boot /mnt/nfs
blspec: blspec_scan_directory: /mnt/nfs loader/entries
eth0: 100Mbps full duplex link detected
DHCP client bound to address 192.168.1.62
blspec: booting PTXdist - EAG-ecu02 imx25-eckelmann-ecu02 from none
Adding "root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp" to Kernel commandline

Loading ARM Linux zImage '/mnt/nfs//boot/zImage'
Loading devicetree from '/mnt/nfs//boot/imx25-eckelmann-ecu02.dtb'
m25p0: Cannot find nodepath /soc/aips@43f00000/cspi@43fa4000/m25p80@2, cannot fixup
Failed to fixup node in of_mtd_fixup+0x0/0x218: Invalid argument
commandline:  root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp console=ttymxc0,115200n8
Booting Linux on physical CPU 0x0
Linux version 4.9.0-g31434b30298d (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.1) ) #1 2016-07-01
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt:Machine model: Eckelmann AG ECU02
Memory policy: Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line:  root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp console=ttymxc0,115200n8
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120668K/131072K available (6089K kernel code, 525K rwdata, 1332K rodata, 420K init, 247K bss, 10404K reserved, 0K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc05faa98   (6091 kB)
      .init : 0xc07c9000 - 0xc0832000   ( 420 kB)
      .data : 0xc0832000 - 0xc08b5778   ( 526 kB)
       .bss : 0xc08b5778 - 0xc08f3418   ( 248 kB)
NR_IRQS:16 nr_irqs:16 16
MXC IRQ initialized
Switching to timer-based delay loop, resolution 15ns
sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns
clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
ftrace: allocating 21749 entries in 64 pages
Setting up static identity map for 0x80008400 - 0x8000843c
devtmpfs: initialized
VFP support v0.3: not present
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
No ATAGs?
imx25-pinctrl 43fac000.iomuxc: initialized IMX pinctrl driver
GPIO line 102 (can-pwr-down) hogged as output/low
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource mxc_timer1
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 256 (order: -1, 3072 bytes)
workingset: timestamp_bits=30 max_order=15 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler cfq registered (default)
imx-sdma 53fd4000.sdma: Direct firmware load for imx/sdma/sdma-imx25.bin failed with error -2
imx-sdma 53fd4000.sdma: external firmware not found, using ROM firmware
43f90000.serial: ttymxc0 at MMIO 0x43f90000 (irq = 61, base_baud = 4156250) is a IMX
console [ttymxc0] enabled
43f94000.serial: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 4156250) is a IMX
50008000.serial: ttymxc3 at MMIO 0x50008000 (irq = 21, base_baud = 4156250) is a IMX
loop: module loaded
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
nand: Micron MT29F1G16ABBEAH4
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
5 ofpart partitions found on MTD device mxc_nand
Creating 5 MTD partitions on "mxc_nand":
0x000000000000-0x000000100000 : "barebox"
0x000000100000-0x000000200000 : "environment"
0x000000200000-0x000000460000 : "history"
0x000000460000-0x000005460000 : "root"
0x000005460000-0x000008000000 : "var"
spidev spi0.2: buggy DT: spidev listed directly in DT
spi_imx 43fa4000.cspi: probed
spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@0
spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@0
spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@1
spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@1
spi_imx 50004000.cspi: probed
spidev spi1.0: buggy DT: spidev listed directly in DT
spidev spi1.1: buggy DT: spidev listed directly in DT
spi_imx 50010000.cspi: probed
libphy: Fixed MDIO Bus: probed
CAN device driver interface
flexcan 43f88000.can: device registered (reg_base=c890c000, irq=59)
flexcan 43f8c000.can: device registered (reg_base=c8914000, irq=60)
random: fast init done
libphy: fec_enet_mii_bus: probed
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver rtl8192cu
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-mxc: Freescale On-Chip EHCI Host driver
usbcore: registered new interface driver usb-storage
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 53fb8000.esdhc [53fb8000.esdhc] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 10
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
Key type dns_resolver registered
hctosys: unable to open rtc device (rtc0)
random: crng init done