barebox@Eckelmann AG ECU02:/env/boot boot /mnt/nfs blspec: blspec_scan_directory: /mnt/nfs loader/entries eth0: 100Mbps full duplex link detected DHCP client bound to address 192.168.1.62 blspec: booting PTXdist - EAG-ecu02 imx25-eckelmann-ecu02 from none Adding "root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp" to Kernel commandline Loading ARM Linux zImage '/mnt/nfs//boot/zImage' Loading devicetree from '/mnt/nfs//boot/imx25-eckelmann-ecu02.dtb' m25p0: Cannot find nodepath /soc/aips@43f00000/cspi@43fa4000/m25p80@2, cannot fixup Failed to fixup node in of_mtd_fixup+0x0/0x218: Invalid argument commandline: root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp console=ttymxc0,115200n8 Booting Linux on physical CPU 0x0 Linux version 4.9.0-g31434b30298d (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.1) ) #1 2016-07-01 CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache OF: fdt:Machine model: Eckelmann AG ECU02 Memory policy: Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/nfs nfsroot=192.168.1.40:/home/schenk/nfsroot/ecu02,v3,tcp console=ttymxc0,115200n8 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 120668K/131072K available (6089K kernel code, 525K rwdata, 1332K rodata, 420K init, 247K bss, 10404K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc05faa98 (6091 kB) .init : 0xc07c9000 - 0xc0832000 ( 420 kB) .data : 0xc0832000 - 0xc08b5778 ( 526 kB) .bss : 0xc08b5778 - 0xc08f3418 ( 248 kB) NR_IRQS:16 nr_irqs:16 16 MXC IRQ initialized Switching to timer-based delay loop, resolution 15ns sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok ftrace: allocating 21749 entries in 64 pages Setting up static identity map for 0x80008400 - 0x8000843c devtmpfs: initialized VFP support v0.3: not present clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder No ATAGs? imx25-pinctrl 43fac000.iomuxc: initialized IMX pinctrl driver GPIO line 102 (can-pwr-down) hogged as output/low SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered clocksource: Switched to clocksource mxc_timer1 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. futex hash table entries: 256 (order: -1, 3072 bytes) workingset: timestamp_bits=30 max_order=15 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) io scheduler noop registered io scheduler cfq registered (default) imx-sdma 53fd4000.sdma: Direct firmware load for imx/sdma/sdma-imx25.bin failed with error -2 imx-sdma 53fd4000.sdma: external firmware not found, using ROM firmware 43f90000.serial: ttymxc0 at MMIO 0x43f90000 (irq = 61, base_baud = 4156250) is a IMX console [ttymxc0] enabled 43f94000.serial: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 4156250) is a IMX 50008000.serial: ttymxc3 at MMIO 0x50008000 (irq = 21, base_baud = 4156250) is a IMX loop: module loaded nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1 nand: Micron MT29F1G16ABBEAH4 nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 5 ofpart partitions found on MTD device mxc_nand Creating 5 MTD partitions on "mxc_nand": 0x000000000000-0x000000100000 : "barebox" 0x000000100000-0x000000200000 : "environment" 0x000000200000-0x000000460000 : "history" 0x000000460000-0x000005460000 : "root" 0x000005460000-0x000008000000 : "var" spidev spi0.2: buggy DT: spidev listed directly in DT spi_imx 43fa4000.cspi: probed spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@0 spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@0 spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@1 spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@1 spi_imx 50004000.cspi: probed spidev spi1.0: buggy DT: spidev listed directly in DT spidev spi1.1: buggy DT: spidev listed directly in DT spi_imx 50010000.cspi: probed libphy: Fixed MDIO Bus: probed CAN device driver interface flexcan 43f88000.can: device registered (reg_base=c890c000, irq=59) flexcan 43f8c000.can: device registered (reg_base=c8914000, irq=60) random: fast init done libphy: fec_enet_mii_bus: probed usbcore: registered new interface driver rt2800usb usbcore: registered new interface driver rtl8192cu ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected i2c /dev entries driver sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on 53fb8000.esdhc [53fb8000.esdhc] using DMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 Key type dns_resolver registered hctosys: unable to open rtc device (rtc0) random: crng init done