pastebin - collaborative debugging tool
eckelmann.kpaste.net RSS


ecu01 ukl/development with env/init/partioning fix001
Posted by Anonymous on Wed 9th Sep 2020 17:27
raw | new post

  1. barebox 2019.07.0-20190911-1-EAG_3.01-ga426ac926c17 #1 Wed Sep 9 13:36:54 CEST 2020
  2.  
  3.  
  4. Board: Eckelmann AG ECU01
  5. mdio_bus: miibus0: probed
  6. nand: ONFI flash detected
  7. nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
  8. Bad block table found at page 65472, version 0x01
  9. Bad block table found at page 65408, version 0x01
  10. imx-usb 53ff4400.usb@53ff4400.of: USB EHCI 1.00
  11. imxfb imxfb: i.MX Framebuffer driver
  12. registered as fbconsole0
  13. malloc space: 0x83e7de60 -> 0x87cfbcbf (size 62.5 MiB)
  14. running /env/bin/init...
  15. Check if Memory is flashbased ...
  16. __PASS__
  17.  
  18. Hit CTRL-C to stop autoboot:    0
  19. __DEVELOPER_MODE__ENABLED__
  20. nv variable modified, will save nv variables on shutdown
  21. usb: USB: scanning bus for devices...
  22. usb: 1 USB Device(s) found
  23. usb: USB: scanning bus for devices...
  24. usb: 1 USB Device(s) found
  25. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  26. usb: USB: scanning bus for devices...
  27. usb: 1 USB Device(s) found
  28. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  29. Booting entry 'nand'
  30. usb: USB: scanning bus for devices...
  31. usb: 1 USB Device(s) found
  32. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  33. ubi0: attached by fastmap
  34. ubi0: fastmap pool size: 30
  35. ubi0: fastmap WL pool size: 15
  36. ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 6, need 20
  37. ubi0: registering /dev/nand0.root.ubi
  38. ubi0: registering root as /dev/nand0.root.ubi.root
  39. ubi0: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
  40. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  41. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  42. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  43. ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
  44. ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  45. ubi0: max/mean erase counter: 116/75, WL threshold: 4096, image sequence number: 31310
  46. ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 6
  47. UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
  48. UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  49. UBIFS (ubi0:0): FS size: 78344192 bytes (74 MiB, 617 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  50. UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  51. UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 843f1ce4, small LPT model
  52.  
  53. Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage'
  54. Loading devicetree from '/mnt/nand0-root/boot/imx25-eckelmann-ecu01.dtb'
  55. commandline:  console=ttymxc4,115200n consoleblank=0   vt.global_cursor_default=0 ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3,2048
  56. nv variables modified, saving them
  57. [    0.000000] Booting Linux on physical CPU 0x0
  58. [    0.000000] Linux version 4.9.0-g62e6294dc4e7 (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.0) ) #1 PREEMPT 2016-06-01
  59. [    0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f
  60. [    0.000000] CPU: VIVT data cache, VIVT instruction cache
  61. [    0.000000] OF: fdt:Machine model: Eckelmann AG ECU01
  62. [    0.000000] Memory policy: Data cache writeback
  63. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  64. [    0.000000] Kernel command line:  console=ttymxc4,115200n consoleblank=0   vt.global_cursor_default=0 ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3,2048
  65. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  66. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  67. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  68. [    0.000000] Memory: 121636K/131072K available (5846K kernel code, 205K rwdata, 1656K rodata, 252K init, 180K bss, 9436K reserved, 0K cma-reserved)
  69. [    0.000000] Virtual kernel memory layout:
  70. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  71. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  72. [    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
  73. [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  74. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  75. [    0.000000]       .text : 0xc0008000 - 0xc05bdea0   (5848 kB)
  76. [    0.000000]       .init : 0xc075d000 - 0xc079c000   ( 252 kB)
  77. [    0.000000]       .data : 0xc079c000 - 0xc07cf5e0   ( 206 kB)
  78. [    0.000000]        .bss : 0xc07cf5e0 - 0xc07fc6e0   ( 181 kB)
  79. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  80. [    0.000000] Preemptible hierarchical RCU implementation.
  81. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  82. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  83. [    0.000000] MXC IRQ initialized
  84. [    0.000000] Switching to timer-based delay loop, resolution 15ns
  85. [    0.000025] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns
  86. [    0.000108] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns
  87. [    0.001616] Console: colour dummy device 80x30
  88. [    0.001688] Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500)
  89. [    0.001739] pid_max: default: 32768 minimum: 301
  90. [    0.002003] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  91. [    0.002052] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  92. [    0.004268] CPU: Testing write buffer coherency: ok
  93. [    0.005413] Setting up static identity map for 0x80008400 - 0x80008458
  94. [    0.011086] devtmpfs: initialized
  95. [    0.029710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  96. [    0.030105] pinctrl core: initialized pinctrl subsystem
  97. [    0.032075] NET: Registered protocol family 16
  98. [    0.034111] DMA: preallocated 256 KiB pool for atomic coherent allocations
  99. [    0.061482] cpuidle: using governor ladder
  100. [    0.061946] No ATAGs?
  101. [    0.068798] imx25-pinctrl 43fac000.iomuxc: initialized IMX pinctrl driver
  102. [    0.148162] SCSI subsystem initialized
  103. [    0.149505] usbcore: registered new interface driver usbfs
  104. [    0.149825] usbcore: registered new interface driver hub
  105. [    0.150182] usbcore: registered new device driver usb
  106. [    0.154026] i2c i2c-0: IMX I2C adapter registered
  107. [    0.154100] i2c i2c-0: can't use DMA, using PIO instead.
  108. [    0.155113] pps_core: LinuxPPS API ver. 1 registered
  109. [    0.155157] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  110. [    0.155274] PTP clock support registered
  111. [    0.160865] clocksource: Switched to clocksource mxc_timer1
  112. [    0.210230] NET: Registered protocol family 2
  113. [    0.212620] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  114. [    0.212720] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  115. [    0.212793] TCP: Hash tables configured (established 1024 bind 1024)
  116. [    0.213066] UDP hash table entries: 256 (order: 0, 4096 bytes)
  117. [    0.213156] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  118. [    0.213703] NET: Registered protocol family 1
  119. [    0.215058] RPC: Registered named UNIX socket transport module.
  120. [    0.215109] RPC: Registered udp transport module.
  121. [    0.215129] RPC: Registered tcp transport module.
  122. [    0.215148] RPC: Registered tcp NFSv4.1 backchannel transport module.
  123. [    0.219352] futex hash table entries: 256 (order: -1, 3072 bytes)
  124. [    0.220151] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  125. [    0.254721] NFS: Registering the id_resolver key type
  126. [    0.254824] Key type id_resolver registered
  127. [    0.254857] Key type id_legacy registered
  128. [    0.254923] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  129. [    0.273348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  130. [    0.273403] io scheduler noop registered
  131. [    0.273982] io scheduler cfq registered (default)
  132. [    0.277762] imx-fb 53fbc000.lcdc: i.MX Framebuffer driver
  133. [    0.277995] /display/display-timings/320x240: illegal timing specification in clock-frequency
  134. [    0.278048] /display/display-timings/320x240: error reading timing properties
  135. [    0.278075] /display: error in timing 1
  136. [    0.278101] /display: no timings specified
  137. [    0.278139] imx-fb 53fbc000.lcdc: Failed to get videomode from DT
  138. [    0.278211] imx-fb: probe of 53fbc000.lcdc failed with error -22
  139. [    0.281331] imx-sdma 53fd4000.sdma: Direct firmware load for imx/sdma/sdma-imx25.bin failed with error -2
  140. [    0.281398] imx-sdma 53fd4000.sdma: external firmware not found, using ROM firmware
  141. [    0.297553] 43f94000.serial: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 2078125) is a IMX
  142. [    0.300173] 5002c000.serial: ttymxc4 at MMIO 0x5002c000 (irq = 56, base_baud = 2078125) is a IMX
  143. [    0.829518] console [ttymxc4] enabled
  144. [    0.862969] loop: module loaded
  145. [    0.869918] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
  146. [    0.876461] nand: Micron MT29F1G16ABBEAH4
  147. [    0.880521] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  148. [    0.890177] Bad block table found at page 65472, version 0x01
  149. [    0.896803] Bad block table found at page 65408, version 0x01
  150. [    0.904386] 5 ofpart partitions found on MTD device mxc_nand
  151. [    0.910371] Creating 5 MTD partitions on "mxc_nand":
  152. [    0.915621] 0x000000000000-0x000000100000 : "barebox"
  153. [    0.925786] 0x000000100000-0x000000200000 : "environment"
  154. [    0.936482] 0x000000460000-0x000005460000 : "root"
  155. [    0.950466] 0x000005460000-0x000008000000 : "var"
  156. [    0.962786] 0x000000200000-0x000000460000 : "history"
  157. [    0.978133] spi_imx 43fa4000.cspi: probed
  158. [    0.985766] spi_master spi1: cannot find modalias for /soc/spba@50000000/cspi@50010000/spidev@1
  159. [    0.994768] spi_master spi1: Failed to create SPI device for /soc/spba@50000000/cspi@50010000/spidev@1
  160. [    1.004281] spi_imx 50010000.cspi: probed
  161. [    1.009940] libphy: Fixed MDIO Bus: probed
  162. [    1.016507] usbcore: registered new interface driver rt2800usb
  163. [    1.022862] usbcore: registered new interface driver rtl8192cu
  164. [    1.029199] usbcore: registered new interface driver asix
  165. [    1.035020] usbcore: registered new interface driver ax88179_178a
  166. [    1.042185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  167. [    1.048912] ehci-mxc: Freescale On-Chip EHCI Host driver
  168. [    1.055386] usbcore: registered new interface driver usb-storage
  169. [    1.072614] ci_hdrc ci_hdrc.1: EHCI Host Controller
  170. [    1.078787] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  171. [    1.100980] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  172. [    1.109923] hub 1-0:1.0: USB hub found
  173. [    1.114123] hub 1-0:1.0: 1 port detected
  174. [    1.124369] input: 43fa8000.kpp as /devices/platform/soc/43f00000.aips/43fa8000.kpp/input/input0
  175. [    1.134841] rtc-pcf2123 spi1.0: clock was stopped. Time is not valid
  176. [    1.142012] rtc-pcf2123 spi1.0: spiclk 4000 KHz.
  177. [    1.147161] rtc-pcf2123 spi1.0: clock was stopped. Time is not valid
  178. [    1.154560] rtc-pcf2123 spi1.0: rtc core: registered rtc-pcf2123 as rtc0
  179. [    1.162015] i2c /dev entries driver
  180. [    1.168300] sdhci: Secure Digital Host Controller Interface driver
  181. [    1.174685] sdhci: Copyright(c) Pierre Ossman
  182. [    1.179184] sdhci-pltfm: SDHCI platform and OF driver helper
  183. [    1.186937] usbcore: registered new interface driver usbhid
  184. [    1.192708] usbhid: USB HID core driver
  185. [    1.199173] NET: Registered protocol family 10
  186. [    1.207475] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  187. [    1.216578] NET: Registered protocol family 17
  188. [    1.222743] Key type dns_resolver registered
  189. [    1.249068] ubi0: attaching mtd3
  190. [    1.254068] random: fast init done
  191. [    1.495217] ubi0: scanning is finished
  192. [    1.512903] ubi0: attached mtd3 (name "var", size 43 MiB)
  193. [    1.518562] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  194. [    1.525601] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  195. [    1.532446] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  196. [    1.539545] ubi0: good PEBs: 345, bad PEBs: 4, corrupted PEBs: 0
  197. [    1.545688] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  198. [    1.553052] ubi0: max/mean erase counter: 81/45, WL threshold: 4096, image sequence number: 48
  199. [    1.561803] ubi0: available PEBs: 87, total reserved PEBs: 258, PEBs reserved for bad PEB handling: 16
  200. [    1.571296] ubi0: background thread "ubi_bgt0d" started, PID 66
  201. [    1.578099] rtc-pcf2123 spi1.0: clock was stopped. Time is not valid
  202. [    1.578121] rtc-pcf2123 spi1.0: hctosys: unable to read the hardware clock
  203. [    1.667728] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "dyn", R/O mode
  204. [    1.675990] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  205. [    1.686065] UBIFS (ubi0:0): FS size: 13840384 bytes (13 MiB, 109 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  206. [    1.696557] UBIFS (ubi0:0): reserved for root: 653715 bytes (638 KiB)
  207. [    1.703144] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 30205726-B785-418B-A836-DB1A7803510D, small LPT model
  208. [    1.716025] VFS: Mounted root (ubifs filesystem) readonly on device 0:13.
  209. [    1.723079] devtmpfs: error mounting -2
  210. [    1.729750] Freeing unused kernel memory: 252K (c075d000 - c079c000)
  211. [    1.736269] This architecture does not have kernel memory protection.
  212. [    1.743107] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
  213. [    1.756300] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with {%HIGHLIGHT}




All content is user-submitted.
The administrators of this site (kpaste.net) are not responsible for their content.
Abuse reports should be emailed to us at