barebox 2018.05.0-20190221-1-EAG_3.00-g7f2059e #1 Mon Jul 22 08:44:31 CEST 2019


Board: Eckelmann AG ECU01
mdio_bus: miibus0: probed
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
imx-usb 53ff4400.usb: USB EHCI 1.00
imxfb imxfb: i.MX Framebuffer driver
malloc space: 0x83e7dde0 -> 0x87cfbbbf (size 62.5 MiB)
running /env/bin/init...
Check if Memory is flashbased ...
__PASS__

Hit CTRL-C to stop autoboot:    0
__DEVELOPER_MODE__ENABLED__
nv variable modified, will save nv variables on shutdown
usb: USB: scanning bus for devices...
usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
usb: Bus 001 Device 002: ID 090c:1000 Flash Disk
Using index 0 for the new disk
usb: 2 USB Device(s) found
usb: USB: scanning bus for devices...
usb: 2 USB Device(s) found
booting 'nand'
usb: USB: scanning bus for devices...
usb: 2 USB Device(s) found
usb_update_rootfs: Found Imagefile: /mnt/usbstorage/quantron-a/root.ubi
ubi0: scanning is finished
ubi0: registering /dev/nand0.var.ubi
ubi0: registering dyn as /dev/nand0.var.ubi.dyn
ubi0: registering stat as /dev/nand0.var.ubi.stat
ubi0: attached mtd0 (name "nand0.var", size 43 MiB) to ubi0
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 347, bad PEBs: 2, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 78/40, WL threshold: 4096, image sequence number: 22633
ubi0: available PEBs: 85, total reserved PEBs: 262, PEBs reserved for bad PEB handling: 18
usb_update_rootfs: var.dyn contains data.
ubi0: detaching mtd0 from ubi0
ubi0: removing nand0.var.ubi
ubi0: mtd0 is detached
umount: Bad address
failed to detach: No such file or directory
ubidetach: No such file or directory
ubiformat: nand0.root (nand), size 83886080 bytes (80 MiB), 640 eraseblocks of 131072 bytes (128 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 639 -- 100 % complete  
ubiformat: 640 eraseblocks have valid erase counter, mean value is 59
ubiformat: flashing eraseblock 399 -- 62 % complete  
ubiformat: formatting eraseblock 639 -- 100 % complete  
usb_update_rootfs: ubi.var contains data, skipping format of /dev/nand0.var.
usb_update_rootfs: OK