pastebin - collaborative debugging tool
eckelmann.kpaste.net RSS


jcng_ukl_development20200908 ecu01 dmesg
Posted by Anonymous on Wed 9th Sep 2020 14:15
raw | new post

  1. # dmesg
  2. Booting Linux on physical CPU 0x0
  3. Linux version 4.9.0-gab8c2fffbab7 (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.0) ) #1 2016-06-01
  4. CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f
  5. CPU: VIVT data cache, VIVT instruction cache
  6. OF: fdt:Machine model: Eckelmann AG ECU02
  7. Memory policy: Data cache writeback
  8. On node 0 totalpages: 32768
  9. free_area_init_node: node 0, pgdat c08ada08, node_mem_map c7efb000
  10.   Normal zone: 256 pages used for memmap
  11.   Normal zone: 0 pages reserved
  12.   Normal zone: 32768 pages, LIFO batch:7
  13. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  14. pcpu-alloc: [0] 0
  15. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  16. Kernel command line:  console=ttymxc0,115200n8   console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3
  17. PID hash table entries: 512 (order: -1, 2048 bytes)
  18. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  19. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  20. Memory: 120668K/131072K available (6089K kernel code, 525K rwdata, 1332K rodata, 420K init, 247K bss, 10404K reserved, 0K cma-reserved)
  21. Virtual kernel memory layout:
  22.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  23.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  24.     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
  25.     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  26.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  27.       .text : 0xc0008000 - 0xc05faa98   (6091 kB)
  28.       .init : 0xc07c9000 - 0xc0832000   ( 420 kB)
  29.       .data : 0xc0832000 - 0xc08b5778   ( 526 kB)
  30.        .bss : 0xc08b5778 - 0xc08f3418   ( 248 kB)
  31. NR_IRQS:16 nr_irqs:16 16
  32. MXC IRQ initialized
  33. Switching to timer-based delay loop, resolution 15ns
  34. sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns
  35. clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns
  36. Console: colour dummy device 80x30
  37. Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500)
  38. pid_max: default: 32768 minimum: 301
  39. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. CPU: Testing write buffer coherency: ok
  42. ftrace: allocating 21749 entries in 64 pages
  43. Setting up static identity map for 0x80008400 - 0x8000843c
  44. devtmpfs: initialized
  45. VFP support v0.3: not present
  46. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  47. pinctrl core: initialized pinctrl subsystem
  48. NET: Registered protocol family 16
  49. DMA: preallocated 256 KiB pool for atomic coherent allocations
  50. cpuidle: using governor ladder
  51. No ATAGs?
  52. imx25-pinctrl 43fac000.iomuxc: initialized IMX pinctrl driver
  53. GPIO line 102 (can-pwr-down) hogged as output/low
  54. gpio gpiochip0: (53f9c000.gpio): added GPIO chardev (254:0)
  55. gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip0 (53f9c000.gpio)
  56. gpio gpiochip1: (53fa4000.gpio): added GPIO chardev (254:1)
  57. gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip1 (53fa4000.gpio)
  58. gpio gpiochip2: (53fcc000.gpio): added GPIO chardev (254:2)
  59. gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip2 (53fcc000.gpio)
  60. gpio gpiochip3: (53fd0000.gpio): added GPIO chardev (254:3)
  61. gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip3 (53fd0000.gpio)
  62. SCSI subsystem initialized
  63. usbcore: registered new interface driver usbfs
  64. usbcore: registered new interface driver hub
  65. usbcore: registered new device driver usb
  66. usb_phy_generic usbphy:usb-phy@0: GPIO lookup for consumer reset
  67. usb_phy_generic usbphy:usb-phy@0: using device tree for GPIO lookup
  68. of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/usbphy/usb-phy@0[0]'
  69. of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/usbphy/usb-phy@0[0]'
  70. usb_phy_generic usbphy:usb-phy@0: using lookup tables for GPIO lookup
  71. usb_phy_generic usbphy:usb-phy@0: lookup for GPIO reset failed
  72. usb_phy_generic usbphy:usb-phy@0: GPIO lookup for consumer vbus-detect
  73. usb_phy_generic usbphy:usb-phy@0: using device tree for GPIO lookup
  74. of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/usbphy/usb-phy@0[0]'
  75. of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/usbphy/usb-phy@0[0]'
  76. usb_phy_generic usbphy:usb-phy@0: using lookup tables for GPIO lookup
  77. usb_phy_generic usbphy:usb-phy@0: lookup for GPIO vbus-detect failed
  78. usb_phy_generic usbphy:usb-phy@1: GPIO lookup for consumer reset
  79. usb_phy_generic usbphy:usb-phy@1: using device tree for GPIO lookup
  80. of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/usbphy/usb-phy@1[0]'
  81. of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/usbphy/usb-phy@1[0]'
  82. usb_phy_generic usbphy:usb-phy@1: using lookup tables for GPIO lookup
  83. usb_phy_generic usbphy:usb-phy@1: lookup for GPIO reset failed
  84. usb_phy_generic usbphy:usb-phy@1: GPIO lookup for consumer vbus-detect
  85. usb_phy_generic usbphy:usb-phy@1: using device tree for GPIO lookup
  86. of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/usbphy/usb-phy@1[0]'
  87. of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/usbphy/usb-phy@1[0]'
  88. usb_phy_generic usbphy:usb-phy@1: using lookup tables for GPIO lookup
  89. usb_phy_generic usbphy:usb-phy@1: lookup for GPIO vbus-detect failed
  90. pps_core: LinuxPPS API ver. 1 registered
  91. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  92. PTP clock support registered
  93. clocksource: Switched to clocksource mxc_timer1
  94. NET: Registered protocol family 2
  95. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  96. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  97. TCP: Hash tables configured (established 1024 bind 1024)
  98. UDP hash table entries: 256 (order: 0, 4096 bytes)
  99. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  100. NET: Registered protocol family 1
  101. RPC: Registered named UNIX socket transport module.
  102. RPC: Registered udp transport module.
  103. RPC: Registered tcp transport module.
  104. RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. futex hash table entries: 256 (order: -1, 3072 bytes)
  106. workingset: timestamp_bits=30 max_order=15 bucket_order=0
  107. NFS: Registering the id_resolver key type
  108. Key type id_resolver registered
  109. Key type id_legacy registered
  110. nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  111. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  112. io scheduler noop registered
  113. io scheduler cfq registered (default)
  114. imx-sdma 53fd4000.sdma: Direct firmware load for imx/sdma/sdma-imx25.bin failed with error -2
  115. imx-sdma 53fd4000.sdma: external firmware not found, using ROM firmware
  116. imx-uart 43f90000.serial: GPIO lookup for consumer cts
  117. imx-uart 43f90000.serial: using device tree for GPIO lookup
  118. of_get_named_gpiod_flags: can't parse 'cts-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  119. of_get_named_gpiod_flags: can't parse 'cts-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  120. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  121. imx-uart 43f90000.serial: lookup for GPIO cts failed
  122. imx-uart 43f90000.serial: GPIO lookup for consumer dsr
  123. imx-uart 43f90000.serial: using device tree for GPIO lookup
  124. of_get_named_gpiod_flags: can't parse 'dsr-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  125. of_get_named_gpiod_flags: can't parse 'dsr-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  126. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  127. imx-uart 43f90000.serial: lookup for GPIO dsr failed
  128. imx-uart 43f90000.serial: GPIO lookup for consumer dcd
  129. imx-uart 43f90000.serial: using device tree for GPIO lookup
  130. of_get_named_gpiod_flags: can't parse 'dcd-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  131. of_get_named_gpiod_flags: can't parse 'dcd-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  132. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  133. imx-uart 43f90000.serial: lookup for GPIO dcd failed
  134. imx-uart 43f90000.serial: GPIO lookup for consumer rng
  135. imx-uart 43f90000.serial: using device tree for GPIO lookup
  136. of_get_named_gpiod_flags: can't parse 'rng-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  137. of_get_named_gpiod_flags: can't parse 'rng-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  138. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  139. imx-uart 43f90000.serial: lookup for GPIO rng failed
  140. imx-uart 43f90000.serial: GPIO lookup for consumer rts
  141. imx-uart 43f90000.serial: using device tree for GPIO lookup
  142. of_get_named_gpiod_flags: can't parse 'rts-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  143. of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  144. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  145. imx-uart 43f90000.serial: lookup for GPIO rts failed
  146. imx-uart 43f90000.serial: GPIO lookup for consumer dtr
  147. imx-uart 43f90000.serial: using device tree for GPIO lookup
  148. of_get_named_gpiod_flags: can't parse 'dtr-gpios' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  149. of_get_named_gpiod_flags: can't parse 'dtr-gpio' property of node '/soc/aips@43f00000/serial@43f90000[0]'
  150. imx-uart 43f90000.serial: using lookup tables for GPIO lookup
  151. imx-uart 43f90000.serial: lookup for GPIO dtr failed
  152. 43f90000.serial: ttymxc0 at MMIO 0x43f90000 (irq = 61, base_baud = 4156250) is a IMX
  153. console [ttymxc0] enabled
  154. imx-uart 43f94000.serial: GPIO lookup for consumer cts
  155. imx-uart 43f94000.serial: using device tree for GPIO lookup
  156. of_get_named_gpiod_flags: can't parse 'cts-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  157. of_get_named_gpiod_flags: can't parse 'cts-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  158. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  159. imx-uart 43f94000.serial: lookup for GPIO cts failed
  160. imx-uart 43f94000.serial: GPIO lookup for consumer dsr
  161. imx-uart 43f94000.serial: using device tree for GPIO lookup
  162. of_get_named_gpiod_flags: can't parse 'dsr-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  163. of_get_named_gpiod_flags: can't parse 'dsr-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  164. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  165. imx-uart 43f94000.serial: lookup for GPIO dsr failed
  166. imx-uart 43f94000.serial: GPIO lookup for consumer dcd
  167. imx-uart 43f94000.serial: using device tree for GPIO lookup
  168. of_get_named_gpiod_flags: can't parse 'dcd-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  169. of_get_named_gpiod_flags: can't parse 'dcd-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  170. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  171. imx-uart 43f94000.serial: lookup for GPIO dcd failed
  172. imx-uart 43f94000.serial: GPIO lookup for consumer rng
  173. imx-uart 43f94000.serial: using device tree for GPIO lookup
  174. of_get_named_gpiod_flags: can't parse 'rng-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  175. of_get_named_gpiod_flags: can't parse 'rng-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  176. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  177. imx-uart 43f94000.serial: lookup for GPIO rng failed
  178. imx-uart 43f94000.serial: GPIO lookup for consumer rts
  179. imx-uart 43f94000.serial: using device tree for GPIO lookup
  180. of_get_named_gpiod_flags: can't parse 'rts-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  181. of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  182. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  183. imx-uart 43f94000.serial: lookup for GPIO rts failed
  184. imx-uart 43f94000.serial: GPIO lookup for consumer dtr
  185. imx-uart 43f94000.serial: using device tree for GPIO lookup
  186. of_get_named_gpiod_flags: can't parse 'dtr-gpios' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  187. of_get_named_gpiod_flags: can't parse 'dtr-gpio' property of node '/soc/aips@43f00000/serial@43f94000[0]'
  188. imx-uart 43f94000.serial: using lookup tables for GPIO lookup
  189. imx-uart 43f94000.serial: lookup for GPIO dtr failed
  190. 43f94000.serial: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 4156250) is a IMX
  191. imx-uart 50008000.serial: GPIO lookup for consumer cts
  192. imx-uart 50008000.serial: using device tree for GPIO lookup
  193. of_get_named_gpiod_flags: can't parse 'cts-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  194. of_get_named_gpiod_flags: can't parse 'cts-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  195. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  196. imx-uart 50008000.serial: lookup for GPIO cts failed
  197. imx-uart 50008000.serial: GPIO lookup for consumer dsr
  198. imx-uart 50008000.serial: using device tree for GPIO lookup
  199. of_get_named_gpiod_flags: can't parse 'dsr-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  200. of_get_named_gpiod_flags: can't parse 'dsr-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  201. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  202. imx-uart 50008000.serial: lookup for GPIO dsr failed
  203. imx-uart 50008000.serial: GPIO lookup for consumer dcd
  204. imx-uart 50008000.serial: using device tree for GPIO lookup
  205. of_get_named_gpiod_flags: can't parse 'dcd-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  206. of_get_named_gpiod_flags: can't parse 'dcd-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  207. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  208. imx-uart 50008000.serial: lookup for GPIO dcd failed
  209. imx-uart 50008000.serial: GPIO lookup for consumer rng
  210. imx-uart 50008000.serial: using device tree for GPIO lookup
  211. of_get_named_gpiod_flags: can't parse 'rng-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  212. of_get_named_gpiod_flags: can't parse 'rng-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  213. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  214. imx-uart 50008000.serial: lookup for GPIO rng failed
  215. imx-uart 50008000.serial: GPIO lookup for consumer rts
  216. imx-uart 50008000.serial: using device tree for GPIO lookup
  217. of_get_named_gpiod_flags: can't parse 'rts-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  218. of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  219. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  220. imx-uart 50008000.serial: lookup for GPIO rts failed
  221. imx-uart 50008000.serial: GPIO lookup for consumer dtr
  222. imx-uart 50008000.serial: using device tree for GPIO lookup
  223. of_get_named_gpiod_flags: can't parse 'dtr-gpios' property of node '/soc/spba@50000000/serial@50008000[0]'
  224. of_get_named_gpiod_flags: can't parse 'dtr-gpio' property of node '/soc/spba@50000000/serial@50008000[0]'
  225. imx-uart 50008000.serial: using lookup tables for GPIO lookup
  226. imx-uart 50008000.serial: lookup for GPIO dtr failed
  227. 50008000.serial: ttymxc3 at MMIO 0x50008000 (irq = 21, base_baud = 4156250) is a IMX
  228. loop: module loaded
  229. nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
  230. nand: Micron MT29F1G16ABBEAH4
  231. nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  232. Bad block table found at page 65472, version 0x01
  233. Bad block table found at page 65408, version 0x01
  234. 5 ofpart partitions found on MTD device mxc_nand
  235. Creating 5 MTD partitions on "mxc_nand":
  236. 0x000000000000-0x000000100000 : "barebox"
  237. 0x000000100000-0x000000200000 : "environment"
  238. 0x000000200000-0x000000460000 : "history"
  239. 0x000000460000-0x000005460000 : "root"
  240. 0x000005460000-0x000008000000 : "var"
  241. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/aips@43f00000/cspi@43fa4000[0]' - status (0)
  242. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/aips@43f00000/cspi@43fa4000[1]' - status (0)
  243. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/aips@43f00000/cspi@43fa4000[2]' - status (0)
  244. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/aips@43f00000/cspi@43fa4000[3]' - status (0)
  245. spidev spi0.2: buggy DT: spidev listed directly in DT
  246. spi_imx 43fa4000.cspi: probed
  247. of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/soc/spba@50000000/cspi@50004000[0]'
  248. of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/soc/spba@50000000/cspi@50004000[1]'
  249. of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/soc/spba@50000000/cspi@50004000[2]'
  250. of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/soc/spba@50000000/cspi@50004000[3]'
  251. spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@0
  252. spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@0
  253. spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@1
  254. spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@1
  255. spi_imx 50004000.cspi: probed
  256. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/spba@50000000/cspi@50010000[0]' - status (0)
  257. of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/spba@50000000/cspi@50010000[1]' - status (0)
  258. spidev spi1.0: buggy DT: spidev listed directly in DT
  259. spidev spi1.1: buggy DT: spidev listed directly in DT
  260. spi_imx 50010000.cspi: probed
  261. libphy: Fixed MDIO Bus: probed
  262. CAN device driver interface
  263. flexcan 43f88000.can: device registered (reg_base=c890c000, irq=59)
  264. flexcan 43f8c000.can: device registered (reg_base=c8914000, irq=60)
  265. of_get_named_gpiod_flags: can't parse 'phy-reset-gpios' property of node '/soc/spba@50000000/ethernet@50038000[0]'
  266. fec 50038000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
  267. fec 50038000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: be:d5:c3:f8:30:cd
  268. random: fast init done
  269. libphy: fec_enet_mii_bus: probed
  270. usbcore: registered new interface driver rt2800usb
  271. usbcore: registered new interface driver rtl8192cu
  272. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  273. ehci-mxc: Freescale On-Chip EHCI Host driver
  274. usbcore: registered new interface driver usb-storage
  275. ci_hdrc ci_hdrc.1: EHCI Host Controller
  276. ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  277. ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  278. hub 1-0:1.0: USB hub found
  279. hub 1-0:1.0: 1 port detected
  280. i2c /dev entries driver
  281. of_get_named_gpiod_flags: parsed 'gpios' property of node '/watchdog[0]' - status (0)
  282. sdhci: Secure Digital Host Controller Interface driver
  283. sdhci: Copyright(c) Pierre Ossman
  284. sdhci-pltfm: SDHCI platform and OF driver helper
  285. of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/aips@53f00000/esdhc@53fb8000[0]'
  286. sdhci-esdhc-imx 53fb8000.esdhc: GPIO lookup for consumer cd
  287. sdhci-esdhc-imx 53fb8000.esdhc: using device tree for GPIO lookup
  288. of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/aips@53f00000/esdhc@53fb8000[0]'
  289. of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/aips@53f00000/esdhc@53fb8000[0]'
  290. sdhci-esdhc-imx 53fb8000.esdhc: using lookup tables for GPIO lookup
  291. sdhci-esdhc-imx 53fb8000.esdhc: lookup for GPIO cd failed
  292. sdhci-esdhc-imx 53fb8000.esdhc: GPIO lookup for consumer wp
  293. sdhci-esdhc-imx 53fb8000.esdhc: using device tree for GPIO lookup
  294. of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/aips@53f00000/esdhc@53fb8000[0]'
  295. of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/aips@53f00000/esdhc@53fb8000[0]'
  296. sdhci-esdhc-imx 53fb8000.esdhc: using lookup tables for GPIO lookup
  297. sdhci-esdhc-imx 53fb8000.esdhc: lookup for GPIO wp failed
  298. mmc0: SDHCI controller on 53fb8000.esdhc [53fb8000.esdhc] using DMA
  299. usbcore: registered new interface driver usbhid
  300. usbhid: USB HID core driver
  301. NET: Registered protocol family 10
  302. sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  303. NET: Registered protocol family 17
  304. can: controller area network core (rev 20120528 abi 9)
  305. NET: Registered protocol family 29
  306. Key type dns_resolver registered
  307. ubi0: attaching mtd3
  308. ubi0: scanning is finished
  309. ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
  310. ubi0: attached mtd3 (name "root", size 80 MiB)
  311. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
  312. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  313. ubi0: VID header offset: 512 (aligned 512), data offset: 2048
  314. ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
  315. ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  316. ubi0: max/mean erase counter: 16/9, WL threshold: 4096, image sequence number: 28359
  317. ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 18
  318. hctosys: unable to open rtc device (rtc0)
  319. ubi0: background thread "ubi_bgt0d" started, PID 67
  320. UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
  321. UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  322. UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
  323. UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  324. UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A7527655-62D7-4B65-B3FF-48E03965D048, small LPT model
  325. VFS: Mounted root (ubifs filesystem) readonly on device 0:14.
  326. devtmpfs: mounted
  327. Freeing unused kernel memory: 420K (c07c9000 - c0832000)
  328. This architecture does not have kernel memory protection.
  329. systemd[1]: System time before build time, advancing clock.
  330. systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  331. systemd[1]: Detected architecture arm.
  332. systemd[1]: Set hostname to <ecu02>.
  333. systemd[1]: Initializing machine ID from random generator.
  334. systemd[1]: Installed transient /etc/machine-id file.
  335. systemd[1]: Hardware watchdog 'GPIO Watchdog', version 0
  336. systemd[1]: Set hardware watchdog to 10s.
  337. systemd[1]: systemd-udev-trigger.service: Cannot add dependency job, ignoring: Unit systemd-udev-trigger.service is masked.
  338. systemd[1]: Reached target Swap.
  339. systemd[1]: Listening on Journal Socket.
  340. ubi1: attaching mtd4
  341. ecu_comp_cap: loading out-of-tree module taints kernel.
  342. ### Flush-Cache module ###
  343. random: crng init done
  344. ubi1: scanning is finished
  345. ubi1: attached mtd4 (name "var", size 43 MiB)
  346. ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
  347. ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  348. ubi1: VID header offset: 512 (aligned 512), data offset: 2048
  349. ubi1: good PEBs: 345, bad PEBs: 4, corrupted PEBs: 0
  350. ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128
  351. ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1444650347
  352. ubi1: available PEBs: 13, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 16
  353. ubi1: background thread "ubi_bgt1d" started, PID 98
  354. systemd[1]: Started Check and create ubi partitions.
  355. systemd[1]: Mounting Mount /var/stat partition...
  356. systemd[1]: Mounting Mount /var/dyn partition...
  357. UBIFS (ubi1:1): background thread "ubifs_bgt1_1" started, PID 126
  358. systemd[1]: Started Journal Service.
  359. UBIFS (ubi1:1): recovery needed
  360. UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 128
  361. UBIFS (ubi1:0): recovery needed
  362. UBIFS (ubi1:1): recovery completed
  363. UBIFS (ubi1:1): UBIFS: mounted UBI device 1, volume 1, name "stat"
  364. UBIFS (ubi1:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  365. UBIFS (ubi1:1): FS size: 18837504 bytes (17 MiB, 146 LEBs), journal size 1032193 bytes (0 MiB, 7 LEBs)
  366. UBIFS (ubi1:1): reserved for root: 889741 bytes (868 KiB)
  367. UBIFS (ubi1:1): media format: w4/r0 (latest is w4/r0), UUID A9BBEFB1-69F3-413A-A1E1-880855BDAB81, small LPT model
  368. UBIFS (ubi1:0): recovery completed
  369. UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "dyn"
  370. UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  371. UBIFS (ubi1:0): FS size: 18837504 bytes (17 MiB, 146 LEBs), journal size 1032193 bytes (0 MiB, 7 LEBs)
  372. UBIFS (ubi1:0): reserved for root: 889741 bytes (868 KiB)
  373. UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8976A6DC-7321-4CB5-839D-12C83A904BEA, small LPT model
  374. systemd-journald[80]: Received request to flush runtime journal from PID 1
  375. UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 140
  376. systemd: 44 output lines suppressed due to ratelimiting
  377. Generic PHY 50038000.etherne:19: attached PHY driver [Generic PHY] (mii_bus:phy_addr=50038000.etherne:19, irq=-1)
  378. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  379. fec 50038000.ethernet eth0: Link is Up - 100Mbps/Half - flow control off
  380. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with {%HIGHLIGHT}




All content is user-submitted.
The administrators of this site (kpaste.net) are not responsible for their content.
Abuse reports should be emailed to us at