pastebin - collaborative debugging tool
eckelmann.kpaste.net RSS


Quantron SW-V4 mtdinfo
Posted by Anonymous on Wed 23rd Sep 2020 12:49
raw | new post

  1. + for i in '/dev/mtd?'
  2. + mtdinfo -u /dev/mtd0
  3. mtd0
  4. Name:                           barebox
  5. Type:                           nand
  6. Eraseblock size:                131072 bytes, 128.0 KiB
  7. Amount of eraseblocks:          8 (1048576 bytes, 1024.0 KiB)
  8. Minimum input/output unit size: 2048 bytes
  9. Sub-page size:                  512 bytes
  10. OOB size:                       64 bytes
  11. Character device major/minor:   90:0
  12. Bad blocks are allowed:         true
  13. Device is writable:             true
  14. Default UBI VID header offset:  512
  15. Default UBI data offset:        2048
  16. Default UBI LEB size:           129024 bytes, 126.0 KiB
  17. Maximum UBI volumes count:      128
  18.  
  19. + for i in '/dev/mtd?'
  20. + mtdinfo -u /dev/mtd1
  21. mtd1
  22. Name:                           environment
  23. Type:                           nand
  24. Eraseblock size:                131072 bytes, 128.0 KiB
  25. Amount of eraseblocks:          8 (1048576 bytes, 1024.0 KiB)
  26. Minimum input/output unit size: 2048 bytes
  27. Sub-page size:                  512 bytes
  28. OOB size:                       64 bytes
  29. Character device major/minor:   90:2
  30. Bad blocks are allowed:         true
  31. Device is writable:             true
  32. Default UBI VID header offset:  512
  33. Default UBI data offset:        2048
  34. Default UBI LEB size:           129024 bytes, 126.0 KiB
  35. Maximum UBI volumes count:      128
  36.  
  37. + for i in '/dev/mtd?'
  38. + mtdinfo -u /dev/mtd2
  39. mtd2
  40. Name:                           history
  41. Type:                           nand
  42. Eraseblock size:                131072 bytes, 128.0 KiB
  43. Amount of eraseblocks:          19 (2490368 bytes, 2.4 MiB)
  44. Minimum input/output unit size: 2048 bytes
  45. Sub-page size:                  512 bytes
  46. OOB size:                       64 bytes
  47. Character device major/minor:   90:4
  48. Bad blocks are allowed:         true
  49. Device is writable:             true
  50. Default UBI VID header offset:  512
  51. Default UBI data offset:        2048
  52. Default UBI LEB size:           129024 bytes, 126.0 KiB
  53. Maximum UBI volumes count:      128
  54.  
  55. + for i in '/dev/mtd?'
  56. + mtdinfo -u /dev/mtd3
  57. mtd3
  58. Name:                           root
  59. Type:                           nand
  60. Eraseblock size:                131072 bytes, 128.0 KiB
  61. Amount of eraseblocks:          640 (83886080 bytes, 80.0 MiB)
  62. Minimum input/output unit size: 2048 bytes
  63. Sub-page size:                  512 bytes
  64. OOB size:                       64 bytes
  65. Character device major/minor:   90:6
  66. Bad blocks are allowed:         true
  67. Device is writable:             true
  68. Default UBI VID header offset:  512
  69. Default UBI data offset:        2048
  70. Default UBI LEB size:           129024 bytes, 126.0 KiB
  71. Maximum UBI volumes count:      128
  72.  
  73. + for i in '/dev/mtd?'
  74. + mtdinfo -u /dev/mtd4
  75. mtd4
  76. Name:                           var
  77. Type:                           nand
  78. Eraseblock size:                131072 bytes, 128.0 KiB
  79. Amount of eraseblocks:          349 (45744128 bytes, 43.6 MiB)
  80. Minimum input/output unit size: 2048 bytes
  81. Sub-page size:                  512 bytes
  82. OOB size:                       64 bytes
  83. Character device major/minor:   90:8
  84. Bad blocks are allowed:         true
  85. Device is writable:             true
  86. Default UBI VID header offset:  512
  87. Default UBI data offset:        2048
  88. Default UBI LEB size:           129024 bytes, 126.0 KiB
  89. Maximum UBI volumes count:      128

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with {%HIGHLIGHT}




All content is user-submitted.
The administrators of this site (kpaste.net) are not responsible for their content.
Abuse reports should be emailed to us at