jcng_ukl_development20200908 boot log
Posted by Anonymous on Wed 9th Sep 2020 10:28
raw | new post

barebox:/ reset


barebox 2016.06.0-EAG_2.02-g069e899255d9 #1 Tue Sep 8 12:20:06 CEST 2020


Board: Eckelmann AG ECU02
mdio_bus: miibus0: probed
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
m25p80 m25p80@20: mr25h256 (32 Kbytes)
imx-usb 53ff4400.usb: USB EHCI 1.00
netconsole: registered as netconsole-1
malloc space: 0x83efde40 -> 0x87dfbc7f (size 63 MiB)
running /env/bin/init...
Check if Memory is flashbased ...
__PASS__
==> Saving Defaultenv ...
saving environment
USB: scanning bus for devices...
Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
1 USB Device(s) found
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed

Hit m for menu or any other key to stop autoboot:  0
blspec: blspec_scan_directory: nand loader/entries
USB: scanning bus for devices...
1 USB Device(s) found
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
USB: scanning bus for devices...
1 USB Device(s) found
running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
Could not find Imagefile: /mnt/usbstorage/ecu02/root.ubi
UBI: scanning is finished
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 16, need 20
UBI: registering /dev/nand0.root.ubi
UBI: registering root as /dev/nand0.root.ubi.root
UBI: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84035124, small LPT model

Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage'
Loading devicetree from '/mnt/nand0-root/boot/imx25-eckelmann-ecu02.dtb'
m25p0: Cannot find nodepath /soc/aips@43f00000/cspi@43fa4000/m25p80@2, cannot fixup
Failed to fixup node in of_mtd_fixup+0x0/0x218: Invalid argument
commandline:  console=ttymxc0,115200n8   console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3
Booting Linux on physical CPU 0x0
Linux version 4.9.0-gab8c2fffbab7 (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.0) ) #1 2016-06-01
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt:Machine model: Eckelmann AG ECU02
Memory policy: Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line:  console=ttymxc0,115200n8   console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120668K/131072K available (6089K kernel code, 525K rwdata, 1332K rodata, 420K init, 247K bss, 10404K reserved, 0K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc05faa98   (6091 kB)
      .init : 0xc07c9000 - 0xc0832000   ( 420 kB)
      .data : 0xc0832000 - 0xc08b5778   ( 526 kB)
       .bss : 0xc08b5778 - 0xc08f3418   ( 248 kB)
NR_IRQS:16 nr_irqs:16 16
MXC IRQ initialized
Switching to timer-based delay loop, resolution 15ns
sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns
clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
ftrace: allocating 21749 entries in 64 pages
Setting up static identity map for 0x80008400 - 0x8000843c
devtmpfs: initialized
VFP support v0.3: not present
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
No ATAGs?
imx25-pinctrl 43fac000.iomuxc: initialized IMX pinctrl driver
GPIO line 102 (can-pwr-down) hogged as output/low
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource mxc_timer1
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 256 (order: -1, 3072 bytes)
workingset: timestamp_bits=30 max_order=15 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler cfq registered (default)
imx-sdma 53fd4000.sdma: Direct firmware load for imx/sdma/sdma-imx25.bin failed with error -2
imx-sdma 53fd4000.sdma: external firmware not found, using ROM firmware
43f90000.serial: ttymxc0 at MMIO 0x43f90000 (irq = 61, base_baud = 4156250) is a IMX
console [ttymxc0] enabled
43f94000.serial: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 4156250) is a IMX
50008000.serial: ttymxc3 at MMIO 0x50008000 (irq = 21, base_baud = 4156250) is a IMX
loop: module loaded
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
nand: Micron MT29F1G16ABBEAH4
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
5 ofpart partitions found on MTD device mxc_nand
Creating 5 MTD partitions on "mxc_nand":
0x000000000000-0x000000100000 : "barebox"
0x000000100000-0x000000200000 : "environment"
0x000000200000-0x000000460000 : "history"
0x000000460000-0x000005460000 : "root"
0x000005460000-0x000008000000 : "var"
spidev spi0.2: buggy DT: spidev listed directly in DT
spi_imx 43fa4000.cspi: probed
spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@0
spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@0
spi_master spi2: cannot find modalias for /soc/spba@50000000/cspi@50004000/adc@1
spi_master spi2: Failed to create SPI device for /soc/spba@50000000/cspi@50004000/adc@1
spi_imx 50004000.cspi: probed
spidev spi1.0: buggy DT: spidev listed directly in DT
spidev spi1.1: buggy DT: spidev listed directly in DT
spi_imx 50010000.cspi: probed
libphy: Fixed MDIO Bus: probed
CAN device driver interface
flexcan 43f88000.can: device registered (reg_base=c890c000, irq=59)
flexcan 43f8c000.can: device registered (reg_base=c8914000, irq=60)
fec 50038000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 50038000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: be:d5:c3:f8:30:cd
random: fast init done
libphy: fec_enet_mii_bus: probed
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver rtl8192cu
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-mxc: Freescale On-Chip EHCI Host driver
usbcore: registered new interface driver usb-storage
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 53fb8000.esdhc [53fb8000.esdhc] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 10
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
Key type dns_resolver registered
ubi0: attaching mtd3
ubi0: scanning is finished
ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
ubi0: attached mtd3 (name "root", size 80 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 16/9, WL threshold: 4096, image sequence number: 28359
ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 18
hctosys: unable to open rtc device (rtc0)
ubi0: background thread "ubi_bgt0d" started, PID 67
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A7527655-62D7-4B65-B3FF-48E03965D048, small LPT model
VFS: Mounted root (ubifs filesystem) readonly on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 420K (c07c9000 - c0832000)
This architecture does not have kernel memory protection.
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture arm.

Welcome to PTXdist / EAG-ecu02!

systemd[1]: Set hostname to <ecu02>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: Hardware watchdog 'GPIO Watchdog', version 0
systemd[1]: Set hardware watchdog to 10s.
systemd[1]: systemd-udev-trigger.service: Cannot add dependency job, ignoring: Unit systemd-udev-trigger.service is masked.
systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice System Slice.
         Mounting Debug File System...
         Starting Attach data ubi partition...
         Starting Load Kernel Modules...
ubi1: attaching mtd4
         Starting Journal Service...
         Mounting POSIX Message Queue File System...
         Starting Remount Root and Kernel File Systems...
         Starting Create list of required st... nodes for the current kernel...
ecu_comp_cap: loading out-of-tree module taints kernel.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
### Flush-Cache module ###
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Apply Kernel Variables...
random: crng init done
ubi1: scanning is finished
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
ubi1: attached mtd4 (name "var", size 43 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 345, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1444650347
ubi1: available PEBs: 13, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 16
ubi1: background thread "ubi_bgt1d" started, PID 98
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/run...
         Mounting /var/tmp...
         Mounting /tmp...
         Mounting /var/lib...
         Mounting /var/lock...
         Mounting /var/log...
         Mounting /media...
[  OK  ] Mounted /tmp.
[  OK  ] Mounted /media.
[  OK  ] Mounted /var/lib.
[  OK  ] Mounted /var/log.
[  OK  ] Mounted /var/run.
[  OK  ] Mounted /var/lock.
[  OK  ] Mounted /var/tmp.
[  OK  ] Started Attach data ubi partition.
         Starting Check and create ubi partitions...
         Mounting /var/lib/nfs...
[  OK  ] Mounted /var/lib/nfs.
[  OK  ] Started udev Kernel Device Manager.
systemd[1]: Started Check and create ubi partitions.
[  OK  ] Started Check and create ubi partitions.
systemd[1]: Mounting Mount /var/stat partition...
         Mounting Mount /var/stat partition...
systemd[1]: Mounting Mount /var/dyn partition...
UBIFS (ubi1:1): background thread "ubifs_bgt1_1" started, PID 126
         Mounting Mount /var/dyn partition...
systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
UBIFS (ubi1:1): recovery needed
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 128
         Starting Flush Journal to Persistent Storage...
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:1): recovery completed
UBIFS (ubi1:1): UBIFS: mounted UBI device 1, volume 1, name "stat"
UBIFS (ubi1:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:1): FS size: 18837504 bytes (17 MiB, 146 LEBs), journal size 1032193 bytes (0 MiB, 7 LEBs)
UBIFS (ubi1:1): reserved for root: 889741 bytes (868 KiB)
UBIFS (ubi1:1): media format: w4/r0 (latest is w4/r0), UUID A9BBEFB1-69F3-413A-A1E1-880855BDAB81, small LPT model
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "dyn"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 18837504 bytes (17 MiB, 146 LEBs), journal size 1032193 bytes (0 MiB, 7 LEBs)
UBIFS (ubi1:0): reserved for root: 889741 bytes (868 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8976A6DC-7321-4CB5-839D-12C83A904BEA, small LPT model
[  OK  ] Mounted Mount /var/stat partition.
[  OK  ] Mounted Mount /var/dyn partition.
[  OK  ] Reached target Local File Systems.
systemd-journald[80]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[FAILED] Failed to start Create Volatile Files and Directories.
See 'systemctl status systemd-tmpfiles-setup.service' for details.
         Starting Network Time Synchronization...
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
[  OK  ] Reached target System Update.
         Starting First boot services...
systemd-rc-once[136]: remounting root rw...mounting rootfs writable
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 140
systemd-rc-once[136]: done
systemd-rc-once[136]: running rc.once.d services...
systemd-rc-once[136]: running restore-etc ...
systemd-rc-once[136]: No os-release in backup found, skip sourcing it
systemd-rc-once[136]: configfile: /etc/backup-etc.conf
systemd-rc-once[136]: backup location: /var/dyn/backup_etc
systemd-rc-once[136]: backup of backup location:
systemd-rc-once[136]: Data from current system
systemd-rc-once[136]: version:          2016.06.1
systemd-rc-once[136]: vendor:           EAG
systemd-rc-once[136]: name:             ecu02
systemd-rc-once[136]: bsp version:      -V2.4.6
systemd-rc-once[136]: platform name     ecu02
systemd-rc-once[136]: platform version: -2012.10.0
systemd-rc-once[136]: build date:       2020-09-08T11:27:06+0200
systemd-rc-once[136]: Data from backup
systemd-rc-once[136]: version:
systemd-rc-once[136]: vendor:
systemd-rc-once[136]: name:
systemd-rc-once[136]: bsp version:
systemd-rc-once[136]: platform name
systemd-rc-once[136]: platform version:
systemd-rc-once[136]: build date:       i
systemd-rc-once[136]: generating backup of /var/dyn/backup_etc
systemd-rc-once[136]: storing backup in: 2016_05_31_22_00---config.tgz
systemd-rc-once[136]: tar: removing leading '/' from member names
systemd-rc-once[136]: Backup of backup-etc done
systemd-rc-once[136]: Restoring data for package bb11qa6-basicsys ... done.
systemd-rc-once[136]: /sbin/backup-etc.sh: line 23: /usr/bin/rsync: No such file or directory
systemd-rc-once[136]: run-parts: /etc/restore-etc/S99_backup_etc: exit status 127
systemd: 44 output lines suppressed due to ratelimiting
systemd-rc-once[136]: remounting root ro...done
Generic PHY 50038000.etherne:19: attached PHY driver [Generic PHY] (mii_bus:phy_addr=50038000.etherne:19, irq=-1)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

 _____    _    ____
| ____|  / `  / ___|
|  _|   / _ `| |  _
| |___ / ___ ` |_| |
|_____/_/   `_`____|

                  ___ ____
  ___  ___ _   _ / _ `___ `
 / _ `/ __| | | | | | |__) |
|  __/ (__| |_| | |_| / __/
 `___|`___|`__,_|`___/_____|


OSELAS(R)-ecu02-V2.4.6 / ecu02-2012.10.0
ptxdist-2016.06.1/2020-09-08T11:46:54+0200

ecu02 login: fec 50038000.ethernet eth0: Link is Up - 100Mbps/Half - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

 _____    _    ____
| ____|  / `  / ___|
|  _|   / _ `| |  _
| |___ / ___ ` |_| |
|_____/_/   `_`____|

                  ___ ____
  ___  ___ _   _ / _ `___ `
 / _ `/ __| | | | | | |__) |
|  __/ (__| |_| | |_| / __/
 `___|`___|`__,_|`___/_____|


OSELAS(R)-ecu02-V2.4.6 / ecu02-2012.10.0
ptxdist-2016.06.1/2020-09-08T11:46:54+0200

ecu02 login: