barebox:/ loadenv -d loading environment from defaultenv barebox:/ saveenv saving environment barebox:/ reset barebox 2016.06.0-EAG_2.02-g98782b23275b #1 Wed Aug 26 16:18:47 CEST 2020 Board: Eckelmann AG ECU02 mdio_bus: miibus0: probed nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 m25p80 m25p80@20: mr25h256 (32 Kbytes) imx-usb 53ff4400.usb: USB EHCI 1.00 netconsole: registered as netconsole-1 malloc space: 0x83efde40 -> 0x87dfbc7f (size 63 MiB) running /env/bin/init... Check if Memory is flashbased ... __PASS__ ==> Saving Defaultenv ... saving environment USB: scanning bus for devices... Bus 001 Device 001: ID 0000:0000 EHCI Host Controller 1 USB Device(s) found USB: scanning bus for devices... 1 USB Device(s) found running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed USB: scanning bus for devices... 1 USB Device(s) found running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed USB: scanning bus for devices... 1 USB Device(s) found running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed Hit m for menu or any other key to stop autoboot: 0 blspec: blspec_scan_directory: nand loader/entries USB: scanning bus for devices... 1 USB Device(s) found USB: scanning bus for devices... 1 USB Device(s) found running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed USB: scanning bus for devices... 1 USB Device(s) found running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed Could not find Imagefile: /mnt/usbstorage/ecu02/root.ubi UBI: scanning is finished UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 16, need 20 UBI: registering /dev/nand0.root.ubi UBI: registering root as /dev/nand0.root.ubi.root UBI: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 78317568 bytes (74 MiB, 607 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 83effabc, small LPT model Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage' commandline: console=ttymxc0,115200n8 lpj=995328 mtdparts=mxc_nand:1024k(barebox),1024k(bareboxenv),2432k(history),80M(root),-(var) console=null ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3 arch_number: 8016