pastebin - collaborative debugging tool
eckelmann.kpaste.net RSS


ukl/devel pre-DTS ecu01 boot log
Posted by Anonymous on Wed 16th Sep 2020 13:21
raw | new post

  1. # ukl/development 74601c85b794+patch pre-DeviceTreeSupport ecu01 boot log
  2. diff --git a/ptxdist/configs/ecu01/barebox-defaultenv-2/init/partitioning b/ptxdist/configs/ecu01/barebox-defaultenv-2/init/partitioning
  3. new file mode 100644
  4. index 0000000000000000000000000000000000000000..2f482fe5bb9d73feece11c9f1e5034d2bbecd2c3
  5. --- /dev/null
  6. +++ b/ptxdist/configs/ecu01/barebox-defaultenv-2/init/partitioning
  7. @@ -0,0 +1,3 @@
  8. +#!/bin/sh
  9. +
  10. +addpart /dev/nand0 0x260000@0x00200000(history)
  11.  
  12. barebox:/ reset
  13.  
  14.  
  15. barebox 2019.07.0-20190911-1-EAG_3.01-g0bf1059c750d #1 Wed Sep 16 08:42:49 CEST 2020
  16.  
  17.  
  18. Board: Eckelmann AG ECU01
  19. mdio_bus: miibus0: probed
  20. nand: ONFI flash detected
  21. nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron MT29F1G16ABBEAH4), 128MiB, page size: 2048, OOB size: 64
  22. Bad block table found at page 65472, version 0x01
  23. Bad block table found at page 65408, version 0x01
  24. imx-usb 53ff4400.usb@53ff4400.of: USB EHCI 1.00
  25. imxfb imxfb: i.MX Framebuffer driver
  26. registered as fbconsole0
  27. malloc space: 0x83e7de60 -> 0x87cfbcbf (size 62.5 MiB)
  28. running /env/bin/init...
  29. Check if Memory is flashbased ...
  30. __PASS__
  31.  
  32. Hit CTRL-C to stop autoboot:    0
  33. __DEVELOPER_MODE__ENABLED__
  34. nv variable modified, will save nv variables on shutdown
  35. usb: USB: scanning bus for devices...
  36. usb: 1 USB Device(s) found
  37. usb: USB: scanning bus for devices...
  38. usb: 1 USB Device(s) found
  39. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  40. usb: USB: scanning bus for devices...
  41. usb: 1 USB Device(s) found
  42. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  43. Booting entry 'nand'
  44. ubi0: scanning is finished
  45. ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 6, need 20
  46. ubi0: registering /dev/nand0.root.ubi
  47. ubi0: registering root as /dev/nand0.root.ubi.root
  48. ubi0: attached mtd0 (name "nand0.root", size 80 MiB) to ubi0
  49. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  50. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  51. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  52. ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
  53. ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  54. ubi0: max/mean erase counter: 118/76, WL threshold: 4096, image sequence number: 29444
  55. ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 6
  56. UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
  57. UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  58. UBIFS (ubi0:0): FS size: 78344192 bytes (74 MiB, 617 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  59. UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  60. UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 843f2348, small LPT model
  61. usb: USB: scanning bus for devices...
  62. usb: 1 USB Device(s) found
  63. running automount command 'usb && if [ -e /dev/disk0.0 ]; then mount /dev/disk0.0 /mnt/usbstorage; elif [ -e /dev/disk0 ]; then mount /dev/disk0 /mnt/usbstorage; fi' failed
  64.  
  65. Loading ARM Linux zImage '/mnt/nand0-root/boot/zImage'
  66. commandline:  console=ttymxc4,115200n consoleblank=0   mtdparts=mxc_nand:1M(barebox),1M(environment),2432k(history),80M(root),44672k(var) vt.global_cursor_default=0 ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3,2048
  67. arch_number: 8017
  68. nv variables modified, saving them
  69. [    0.000000] Booting Linux on physical CPU 0x0
  70. [    0.000000] Initializing cgroup subsys cpuset
  71. [    0.000000] Initializing cgroup subsys cpu
  72. [    0.000000] Initializing cgroup subsys cpuacct
  73. [    0.000000] Linux version 4.0.0-g02b3c4208796 (ptxdist@ptxdist) (gcc version 5.4.0 (OSELAS.Toolchain-2016.06.0) ) #1 PREEMPT 2016-06-01
  74. [    0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f
  75. [    0.000000] CPU: VIVT data cache, VIVT instruction cache
  76. [    0.000000] Machine: Eckelmann ECU01
  77. [    0.000000] Memory policy: Data cache writeback
  78. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  79. [    0.000000] Kernel command line: console=ttymxc4,115200n consoleblank=0   mtdparts=mxc_nand:1M(barebox),1M(environment),2432k(history),80M(root),44672k(var) vt.global_cursor_default=0 ro root=ubi0_0 rootfstype=ubifs ubi.mtd=3,2048
  80. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  81. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  82. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  83. [    0.000000] Memory: 122396K/131072K available (5342K kernel code, 207K rwdata, 1524K rodata, 236K init, 163K bss, 8676K reserved, 0K cma-reserved)
  84. [    0.000000] Virtual kernel memory layout:
  85. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  86. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  87. [    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
  88. [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  89. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  90. [    0.000000]       .text : 0xc0008000 - 0xc06bceec   (6868 kB)
  91. [    0.000000]       .init : 0xc06bd000 - 0xc06f8000   ( 236 kB)
  92. [    0.000000]       .data : 0xc06f8000 - 0xc072bde0   ( 208 kB)
  93. [    0.000000]        .bss : 0xc072bde0 - 0xc0754b2c   ( 164 kB)
  94. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  95. [    0.000000] Preemptible hierarchical RCU implementation.
  96. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  97. [    0.000000] MXC IRQ initialized
  98. [    0.000000] Switching to timer-based delay loop, resolution 15ns
  99. [    0.000027] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 64585974768ns
  100. [    0.000590] Console: colour dummy device 80x30
  101. [    0.000655] Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=332500)
  102. [    0.000703] pid_max: default: 32768 minimum: 301
  103. [    0.000990] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  104. [    0.001044] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  105. [    0.003067] Initializing cgroup subsys blkio
  106. [    0.003149] Initializing cgroup subsys freezer
  107. [    0.003281] CPU: Testing write buffer coherency: ok
  108. [    0.004346] Setting up static identity map for 0x8053dfb0 - 0x8053e008
  109. [    0.009210] devtmpfs: initialized
  110. [    0.014981] pinctrl core: initialized pinctrl subsystem
  111. [    0.017205] NET: Registered protocol family 16
  112. [    0.019320] DMA: preallocated 256 KiB pool for atomic coherent allocations
  113. [    0.035825] cpuidle: using governor ladder
  114. [    0.050974] cpuidle: using governor menu
  115. [    0.087727] SCSI subsystem initialized
  116. [    0.088885] usbcore: registered new interface driver usbfs
  117. [    0.089176] usbcore: registered new interface driver hub
  118. [    0.089571] usbcore: registered new device driver usb
  119. [    0.091099] i2c i2c-0: IMX I2C adapter registered
  120. [    0.091167] i2c i2c-0: can't use DMA
  121. [    0.091482] pps_core: LinuxPPS API ver. 1 registered
  122. [    0.091518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  123. [    0.091836] PTP clock support registered
  124. [    0.097213] Switched to clocksource mxc_timer1
  125. [    0.099361] cfg80211: Calling CRDA to update world regulatory domain
  126. [    0.145256] NET: Registered protocol family 2
  127. [    0.147890] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  128. [    0.147990] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  129. [    0.148063] TCP: Hash tables configured (established 1024 bind 1024)
  130. [    0.148342] TCP: reno registered
  131. [    0.148403] UDP hash table entries: 256 (order: 0, 4096 bytes)
  132. [    0.148485] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  133. [    0.149110] NET: Registered protocol family 1
  134. [    0.150192] RPC: Registered named UNIX socket transport module.
  135. [    0.150243] RPC: Registered udp transport module.
  136. [    0.150265] RPC: Registered tcp transport module.
  137. [    0.150284] RPC: Registered tcp NFSv4.1 backchannel transport module.
  138. [    0.154685] futex hash table entries: 256 (order: -1, 3072 bytes)
  139. [    0.186989] NFS: Registering the id_resolver key type
  140. [    0.187161] Key type id_resolver registered
  141. [    0.187358] Key type id_legacy registered
  142. [    0.187482] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  143. [    0.196611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  144. [    0.196694] io scheduler noop registered
  145. [    0.196850] io scheduler cfq registered (default)
  146. [    0.198059] imx-fb imx21-fb.0: i.MX Framebuffer driver
  147. [    0.204516] Console: switching to colour frame buffer device 40x30
  148. [    0.212461] imx-sdma imx35-sdma: Direct firmware load for sdma-imx25.bin failed with error -2
  149. [    0.212533] imx-sdma imx35-sdma: external firmware not found, using ROM firmware
  150. [    0.225262] imx-sdma imx35-sdma: initialized
  151. [    0.226744] imx21-uart.1: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 2078125) is a IMX
  152. [    0.228420] imx21-uart.4: ttymxc4 at MMIO 0x5002c000 (irq = 56, base_baud = 2078125) is a IMX
  153. [    0.728099] console [ttymxc4] enabled
  154. [    0.755715] loop: module loaded
  155. [    0.761464] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
  156. [    0.768010] nand: Micron NAND 128MiB 1,8V 16-bit
  157. [    0.772779] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  158. [    0.780638] Scanning device for bad blocks
  159. [    1.323713] Bad eraseblock 1022 at 0x000007fc0000
  160. [    1.328882] Bad eraseblock 1023 at 0x000007fe0000
  161. [    1.333786] 5 cmdlinepart partitions found on MTD device mxc_nand
  162. [    1.340032] Creating 5 MTD partitions on "mxc_nand":
  163. [    1.345152] 0x000000000000-0x000000100000 : "barebox"
  164. [    1.354580] 0x000000100000-0x000000200000 : "environment"
  165. [    1.364384] 0x000000200000-0x000000460000 : "history"
  166. [    1.373831] 0x000000460000-0x000005460000 : "root"
  167. [    1.383041] 0x000005460000-0x000008000000 : "var"
  168. [    1.395651] spi_imx imx35-cspi.0: probed
  169. [    1.402757] spi_imx imx35-cspi.1: probed
  170. [    1.409197] fec imx25-fec.0 (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
  171. [    1.418977] fec imx25-fec.0 (unnamed net_device) (uninitialized): Using random MAC address: 46:b4:f3:2f:b5:ac
  172. [    1.433559] libphy: fec_enet_mii_bus: probed
  173. [    1.440490] usbcore: registered new interface driver rtl8192cu
  174. [    1.446931] usbcore: registered new interface driver rt2800usb
  175. [    1.453310] usbcore: registered new interface driver asix
  176. [    1.459186] usbcore: registered new interface driver ax88179_178a
  177. [    1.466488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  178. [    1.473258] ehci-mxc: Freescale On-Chip EHCI Host driver
  179. [    1.502308] mxc-ehci mxc-ehci.1: EHCI Host Controller
  180. [    1.508438] mxc-ehci mxc-ehci.1: new USB bus registered, assigned bus number 1
  181. [    1.516407] mxc-ehci mxc-ehci.1: irq 51, io mem 0x53ff4400
  182. [    1.527325] mxc-ehci mxc-ehci.1: USB 2.0 started, EHCI 1.00
  183. [    1.536217] hub 1-0:1.0: USB hub found
  184. [    1.540442] hub 1-0:1.0: 1 port detected
  185. [    1.547090] usbcore: registered new interface driver usb-storage
  186. [    1.557066] input: imx-keypad as /devices/platform/imx-keypad/input/input0
  187. [    1.566876] rtc-pcf2123 spi1.0: chip found, driver version 0.6
  188. [    1.572924] rtc-pcf2123 spi1.0: spiclk 4000 KHz.
  189. [    1.582410] rtc-pcf2123 spi1.0: rtc core: registered rtc-pcf2123 as rtc0
  190. [    1.589867] i2c /dev entries driver
  191. [    1.594915] Driver 'mmcblk' needs updating - please use bus_type methods
  192. [    1.602050] Driver 'mmc_test' needs updating - please use bus_type methods
  193. [    1.609737] sdhci: Secure Digital Host Controller Interface driver
  194. [    1.616105] sdhci: Copyright(c) Pierre Ossman
  195. [    1.620646] sdhci-pltfm: SDHCI platform and OF driver helper
  196. [    1.628060] usbcore: registered new interface driver usbhid
  197. [    1.633821] usbhid: USB HID core driver
  198. [    1.638557] TCP: cubic registered
  199. [    1.645708] NET: Registered protocol family 10
  200. [    1.653831] sit: IPv6 over IPv4 tunneling driver
  201. [    1.661097] NET: Registered protocol family 17
  202. [    1.666144] Key type dns_resolver registered
  203. [    1.679168] ubi0: attaching mtd3
  204. [    1.867143] random: nonblocking pool is initialized
  205. [    2.102080] ubi0: scanning is finished
  206. [    2.116682] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 8, need 20
  207. [    2.130012] ubi0: attached mtd3 (name "root", size 80 MiB)
  208. [    2.135755] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  209. [    2.142792] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  210. [    2.149625] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  211. [    2.156714] ubi0: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
  212. [    2.162851] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  213. [    2.170197] ubi0: max/mean erase counter: 118/76, WL threshold: 4096, image sequence number: 29444
  214. [    2.179288] ubi0: available PEBs: 0, total reserved PEBs: 640, PEBs reserved for bad PEB handling: 8
  215. [    2.188592] ubi0: background thread "ubi_bgt0d" started, PID 42
  216. [    2.198123] rtc-pcf2123 spi1.0: setting system clock to 2020-09-16 14:24:37 UTC (1600266277)
  217. [    2.324194] UBIFS: mounted UBI device 0, volume 0, name "root", R/O mode
  218. [    2.331100] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  219. [    2.340383] UBIFS: FS size: 78344192 bytes (74 MiB, 617 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  220. [    2.350164] UBIFS: reserved for root: 0 bytes (0 KiB)
  221. [    2.355352] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 43C75DAE-E0EE-41E0-B7C3-2431197AFF75, small LPT model
  222. [    2.368031] VFS: Mounted root (ubifs filesystem) readonly on device 0:14.
  223. [    2.377691] devtmpfs: mounted
  224. [    2.383480] Freeing unused kernel memory: 236K (c06bd000 - c06f8000)
  225. [    2.916308] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  226. [    2.938480] systemd[1]: Detected architecture arm.
  227.  
  228. Welcome to PTXdist / EAG-ecu01!
  229.  
  230. [    2.969909] systemd[1]: Set hostname to <ecu01>.
  231. [    3.889677] systemd[1]: Configuration file /lib/systemd/system/udev-trigger-massstorage.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  232. [    3.909875] systemd[1]: Configuration file /lib/systemd/system/backup-etc.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  233. [    3.950767] systemd[1]: Configuration file /lib/systemd/system/var-dyn.mount is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  234. [    3.974695] systemd[1]: Configuration file /lib/systemd/system/ubi-check-partitions.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  235. [    3.998746] systemd[1]: Configuration file /lib/systemd/system/ubi-attach.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  236. [    4.065622] systemd[1]: Configuration file /lib/systemd/system/var-stat.mount is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  237. [    4.151929] systemd[1]: Configuration file /lib/systemd/system/application.target is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  238. [    4.176857] systemd[1]: Configuration file /lib/systemd/system/codesys3-rt.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  239. [    4.198197] systemd[1]: [/lib/systemd/system/codesys3-rt.service:22] Unknown lvalue 'ControlGroup' in section 'Service'
  240. [    4.209568] systemd[1]: [/lib/systemd/system/codesys3-rt.service:25] Failed to parse resource value, ignoring: infinity
  241. [    4.233697] systemd[1]: Configuration file /etc/systemd/system/getty.target.wants/getty-udev-trigger-devices.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  242. [    4.322951] systemd[1]: Configuration file /lib/systemd/system/quantron-goodbye.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  243. [    4.346517] systemd[1]: Configuration file /lib/systemd/system/codesys-stick-missing.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  244. [    4.385540] systemd[1]: Configuration file /lib/systemd/system/maintenance.target is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  245. [    4.409128] systemd[1]: Configuration file /lib/systemd/system/testing.target is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
  246. [    4.445274] systemd[1]: dev-hugepages.mount: Cannot add dependency job, ignoring: Unit dev-hugepages.mount is masked.
  247. [    4.456559] systemd[1]: systemd-udev-trigger.service: Cannot add dependency job, ignoring: Unit systemd-udev-trigger.service is masked.
  248. [    4.469692] systemd[1]: sys-kernel-config.mount: Cannot add dependency job, ignoring: Unit sys-kernel-config.mount is masked.
  249. [    4.481411] systemd[1]: sys-kernel-debug.mount: Cannot add dependency job, ignoring: Unit sys-kernel-debug.mount is masked.
  250. [    4.495341] systemd[1]: swap.target: Cannot add dependency job, ignoring: Unit swap.target is masked.
  251. [    4.505006] systemd[1]: dev-mqueue.mount: Cannot add dependency job, ignoring: Unit dev-mqueue.mount is masked.
  252. [    4.515490] systemd[1]: systemd-journal-flush.service: Cannot add dependency job, ignoring: Unit systemd-journal-flush.service is masked.
  253. [    4.528767] systemd[1]: systemd-tmpfiles-clean.timer: Cannot add dependency job, ignoring: Unit systemd-tmpfiles-clean.timer is masked.
  254. [    4.542695] systemd[1]: getty@tty1.service: Cannot add dependency job, ignoring: Unit getty@tty1.service is masked.
  255. [    4.579455] systemd[1]: Listening on Journal Socket (/dev/log).
  256. [  OK  ] Listening on Journal Socket (/dev/log).
  257. [    4.598939] systemd[1]: Listening on udev Control Socket.
  258. [  OK  ] Listening on udev Control Socket.
  259. [    4.618714] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  260. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  261. [    4.644004] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  262. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  263. [    4.674973] systemd[1]: Created slice System Slice.
  264. [  OK  ] Created slice System Slice.
  265. [    4.694071] systemd[1]: Listening on Journal Socket.
  266. [  OK  ] Listening on Journal Socket.
  267. [    4.732582] systemd[1]: Starting Remount Root and Kernel File Systems...
  268.          Starting Remount Root and Kernel File Systems...
  269. [    4.758066] systemd[1]: Reached target Slices.
  270. [  OK  ] Reached target Slices.
  271. [    4.779965] systemd[1]: Created slice system-serial\x2dgetty.slice.
  272. [  OK  ] Created slice system-serial\x2dgetty.slice.
  273. [    4.803641] systemd[1]: Listening on udev Kernel Socket.
  274. [  OK  ] Listening on udev Kernel Socket.
  275. [    4.864861] systemd[1]: Starting udev Coldplug TTY Devices for Getty...
  276.          Starting udev Coldplug TTY Devices for Getty...
  277. [    5.083157] systemd[1]: Starting Load Kernel Modules...
  278.          Starting Load Kernel Modules...
  279. [    5.114831] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  280. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  281. [    5.153240] systemd[1]: Reached target Paths.
  282. [  OK  ] Reached target Paths.
  283. [    5.359611] ads7953_init
  284. [    5.445226] mmc_init() called
  285. [    5.455403] systemd[1]: Starting Journal Service...
  286.          Starting Journal Service...
  287. [    5.541088] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  288.          Starting Create list of required st... nodes for the current kernel...
  289. [    5.604757] qa_driver_init() called
  290. [    5.641651] systemd[1]: Starting Attach data ubi partition...
  291.          Starting Attach data ubi partition...
  292. [    5.688704] systemd[1]: Reached target Remote File Systems.
  293. [  OK  ] Reached target Remote File Systems.
  294. [    5.787132] ubi1: attaching mtd4
  295. [    5.837195] systemd[1]: Started Remount Root and Kernel File Systems.
  296. [  OK  ] Started Remount Root and Kernel File Systems.
  297. [    5.935180] systemd[1]: Started Create list of required static device nodes for the current kernel.
  298. [  OK  ] Started Create list of required sta...ce nodes for the current kernel.
  299. [    6.091329] systemd[1]: Starting Create Static Device Nodes in /dev...
  300.          Starting Create Static Device Nodes in /dev...
  301. [    6.214041] systemd[1]: Started udev Coldplug TTY Devices for Getty.
  302. [  OK  ] Started udev Coldplug TTY Devices for Getty.
  303. [    6.886995] systemd[1]: Started Create Static Device Nodes in /dev.
  304. [  OK  ] Started Create Static Device Nodes in /dev.
  305. [    6.986818] systemd[1]: Starting udev Kernel Device Manager...
  306.          Starting udev Kernel Device Manager...
  307. [    7.039698] systemd[1]: Reached target Local File Systems (Pre).
  308. [  OK  ] Reached target Local File Systems (Pre).
  309. [    7.154227] systemd[1]: Mounting /media...
  310.          Mounting /media...
  311. [    7.267793] systemd[1]: Mounting /var/lock...
  312.          Mounting /var/lock...
  313. [    7.432708] systemd[1]: Mounting /var/run...
  314.          Mounting /var/run...
  315. [    7.555938] systemd[1]: Mounting /var/tmp...
  316.          Mounting /var/tmp...
  317. [    7.623365] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
  318. [    7.687649] ubi1: scanning is finished
  319. [    7.734857] systemd[1]: Mounting /var/log...
  320.          Mounting /var/log...
  321. [    7.798976] ubi1: attached mtd4 (name "var", size 43 MiB)
  322. [    7.839165] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  323. [    7.864922] systemd[1]: Mounting /tmp...
  324. [    7.893377] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  325.          Mounting /tmp...
  326. [    7.937976] systemd[1]: var-lib.mount: Directory /var/lib to mount over is not empty, mounting anyway.
  327. [    7.952658] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  328. [    7.997844] ubi1: good PEBs: 347, bad PEBs: 2, corrupted PEBs: 0
  329. [    8.044393] ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128
  330. [    8.075135] systemd[1]: Mounting /var/lib...
  331. [    8.097924] ubi1: max/mean erase counter: 81/45, WL threshold: 4096, image sequence number: 48
  332.          Mounting /var/lib...
  333. [    8.156671] ubi1: available PEBs: 87, total reserved PEBs: 260, PEBs reserved for bad PEB handling: 18
  334. [    8.215982] ubi1: background thread "ubi_bgt1d" started, PID 83
  335. [    8.241201] systemd[1]: Mounted /tmp.
  336. [  OK  ] Mounted /tmp.
  337. [    8.283685] systemd[1]: Mounted /media.
  338. [  OK  ] Mounted /media.
  339. [    8.323534] systemd[1]: Mounted /var/lib.
  340. [  OK  ] Mounted /var/lib.
  341. [    8.363575] systemd[1]: Mounted /var/log.
  342. [  OK  ] Mounted /var/log.
  343. [    8.393954] systemd[1]: Mounted /var/run.
  344. [  OK  ] Mounted /var/run.
  345. [    8.433794] systemd[1]: Mounted /var/lock.
  346. [  OK  ] Mounted /var/lock.
  347. [    8.454030] systemd[1]: Mounted /var/tmp.
  348. [  OK  ] Mounted /var/tmp.
  349. [    8.501302] systemd[1]: Started Journal Service.
  350. [  OK  ] Started Journal Service.
  351. [  OK  ] Started Attach data ubi partition.
  352. [  OK  ] Started udev Kernel Device Manager.
  353.          Starting Check and create ubi partitions...
  354.          Mounting /var/lib/nfs...
  355. [    9.003808] RTW: rtl8188eu v5.2.2.4_25483.20171222
  356. [    9.045799] RTW: build time: Sep 16 2020 08:33:45
  357. [    9.100286] usbcore: registered new interface driver rtl8188eu
  358. [  OK  ] Found device /dev/ttymxc4.
  359. [  OK  ] Mounted /var/lib/nfs.
  360. [  OK  ] Started Load Kernel Modules.
  361.          Starting Apply Kernel Variables...
  362. [  OK  ] Started Apply Kernel Variables.
  363. [  OK  ] Started Check and create ubi partitions.
  364.          Mounting Mount /var/dyn partition...
  365.          Mounting Mount /var/stat partition...
  366. [    9.766770] UBIFS: background thread "ubifs_bgt1_0" started, PID 103
  367. [    9.880524] UBIFS: background thread "ubifs_bgt1_1" started, PID 105
  368. [    9.995483] UBIFS: mounted UBI device 1, volume 0, name "dyn"
  369. [   10.006378] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  370. [   10.015868] UBIFS: FS size: 13840384 bytes (13 MiB, 109 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  371. [   10.029340] UBIFS: reserved for root: 653715 bytes (638 KiB)
  372. [   10.036219] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 30205726-B785-418B-A836-DB1A7803510D, small LPT model
  373. [   10.085291] UBIFS: mounted UBI device 1, volume 1, name "stat"
  374. [  OK  ] Mounted Mount[   10.105228] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  375.  /var/dyn partition.
  376. [   10.126341] UBIFS: FS size: 13840384 bytes (13 MiB, 109 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  377. [   10.142510] UBIFS: reserved for root: 653715 bytes (638 KiB)
  378. [   10.149611] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E80C166F-06CC-4970-BC1D-F90E77A0FE3B, small LPT model
  379. [  OK  ] Mounted Mount /var/stat partition.
  380. [  OK  ] Reached target Local File Systems.
  381.          Starting Create Volatile Files and Directories...
  382. [FAILED] Failed to start Create Volatile Files and Directories.
  383. See 'systemctl status systemd-tmpfiles-setup.service' for details.
  384.          Starting Network Time Synchronization...
  385.          Starting udev Trigger all Massstorage Devices...
  386. [  OK  ] Started udev Trigger all Massstorage Devices.
  387. [  OK  ] Started Network Time Synchronization.
  388. [  OK  ] Reached target System Time Synchronized.
  389. [  OK  ] Reached target System Initialization.
  390. [  OK  ] Started logrotate timer.
  391. [  OK  ] Reached target Timers.
  392. [  OK  ] Listening on sshd.socket.
  393. [  OK  ] Listening on D-Bus System Message Bus Socket.
  394. [  OK  ] Listening on RPCbind Server Activation Socket.
  395. [  OK  ] Reached target Sockets.
  396. [  OK  ] Reached target Basic System.
  397. [  OK  ] Started D-Bus System Message Bus.
  398. [  OK  ] Started Serial Getty on ttymxc4.
  399. [  OK  ] Reached target Login Prompts.
  400.          Starting Mark kernel activated network interfaces as up...
  401. [  OK  ] Started Backup service for configuration in /etc.
  402. [  OK  ] Started ntpd.
  403. [  OK  ] Started Mark kernel activated network interfaces as up.
  404.          Starting Handle network interface with ifup/ifdown...
  405. [   12.450784] fec imx25-fec.0 eth0: no PHY, assuming direct connection to switch
  406. [   12.458416] libphy: PHY fixed-0:00 not found
  407. [   12.467538] fec imx25-fec.0 eth0: could not attach to PHY
  408. [FAILED] Failed to start Handle network interface with ifup/ifdown.
  409. See 'systemctl status ifupdown.service' for details.
  410. [  OK  ] Reached target Network.
  411. [  OK  ] Reached target Multi-User System.
  412.          Starting CoDeSys 3 runtime...
  413. [  OK  ] Reached target Graphical Interface.
  414.          Starting Say Goodbye to user at Shutdown...
  415. [  OK  ] Started Say Goodbye to user at Shutdown.
  416.  
  417.  _____    _    ____
  418. | ____|  / `  / ___|
  419. |  _|   / _ `| |  _
  420. | |___ / ___ ` |_| |
  421. |_____/_/   `_`____|
  422.  
  423.                   ___  _
  424.   ___  ___ _   _ / _ `/ |
  425.  / _ `/ __| | | | | | | |
  426. |  __/ (__| |_| | |_| | |
  427.  `___|`___|`__,_|`___/|_|
  428.  
  429.  
  430. OSELAS(R)-ecu01-V3.1.10 / ecu01-2012.10.0
  431. ptxdist-2016.06.1/2020-09-16T08:20:07+0200
  432.  
  433. ecu01 login: [   24.314937] clock not found: mxc_pwm.0
  434. [   24.327595] clock not found: mxc_pwm.1
  435. [   24.354600] qa_mmc_open()
  436. [   24.357465] ecu01-mmc: pin PIN_V_NAMUR_VALID = 0
  437. [   24.362119] ecu01-mmc: running in WALTERSCHEID mode (12 volt signals).
  438. [   24.368902] ecu01-compcap: irq=70/70, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  439. [   24.378679] ecu01-compcap: irq=69/69, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  440. [   24.388455] ecu01-compcap: irq=17/17, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  441. [   24.398187] qa_mmc_release()
  442. [   24.401325] qa_mmc_open()
  443. [   24.404188] ecu01-compcap: irq=70/70, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  444. [   24.413948] ecu01-compcap: irq=69/69, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  445. [   24.423706] ecu01-compcap: irq=17/17, failed to change interrupt thread pid=-1 to 'SCHED_FIFO'/rtprio=95
  446. [   29.271753] UBIFS: background thread "ubifs_bgt0_0" started, PID 204
  447. [   30.038147] UBIFS: background thread "ubifs_bgt0_0" stops

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with {%HIGHLIGHT}




All content is user-submitted.
The administrators of this site (kpaste.net) are not responsible for their content.
Abuse reports should be emailed to us at